Hi again Ioan,

I spent a little more time on that piece of stencil material (about
15-minutes) and it turned out pretty good:

http://stevezeva.homestead.com/Stencil_Mirror_2.jpg

Wound up giving it to one our final inspectors....

Steve

On Tue, May 12, 2015 at 2:24 PM, Steve Gregory <[log in to unmask]> wrote:

> Hi Ioan!
>
> Hey why not make your own? I'm sure you have some old stencils laying
> around, so just cut a piece out of one and take a Dremel tool and get one
> of them fabric buffing wheels that usually come with them and some of that
> brick red buffing compound in a stick that nobody ever uses, then buff
> yourself up your own mirror. Here's a piece of stencil that I only spent a
> few minutes on and it buffs up really reflective:
>
> http://stevezeva.homestead.com/Stencil_Mirror.jpg
>
> Steve
>
> On Tue, May 12, 2015 at 6:06 AM, Ioan Tempea <
> [log in to unmask]> wrote:
>
>> Dear Technos,
>>
>> We need to inspect epoxy bonds of a few components placed about 0.010"
>> away from a cavity wall, perpendicular to the wall. As direct view is not
>> possible, I was thinking about using some sort of highly reflective tape or
>> thin sheet metal, that we would slide between the wall and the terminations.
>>
>> Do you have any suggestions of such material?
>>
>> Thanks,
>>
>> Ioan Tempea, P. Eng.
>> Manufacturing Engineer, Satellite Systems
>>
>> MacDonald, Dettwiler and Associates Corporation, 21025 Trans-Canada
>> Highway, Ste-Anne-de-Bellevue, QC, Canada H9X 3R2
>> Tel: +1-514-457-2150 x3556
>> www.mdacorporation.com<http://www.mdacorporation.com/>
>>
>> This e-mail, and any attachments, are intended solely for the use of the
>> intended recipient(s) and may contain legally privileged, proprietary
>> and/or confidential information. Any use, disclosure, dissemination,
>> distribution or copying of this e-mail and any attachments for any purposes
>> that have not been specifically authorized by the sender is strictly
>> prohibited. If you are not the intended recipient, please immediately
>> notify the sender by reply e-mail and permanently delete all copies and
>> attachments. This email is for informational purposes only and shall not be
>> interpreted to authorize or conclude a binding agreement between MDA and
>> any other party unless this email contains or is accompanied by an express
>> written confirmation of MDA's intention to enter into a binding agreement,
>> such confirmation shall only be provided by an authorized representative of
>> MDA.
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud service.
>> For more information please contact helpdesk at x2960 or [log in to unmask]
>> ______________________________________________________________________
>>
>
>

-- 


This email and any attachments are only for use by the intended 
recipient(s) and may contain legally privileged, confidential, proprietary 
or otherwise private information. Any unauthorized use, reproduction, 
dissemination, distribution or other disclosure of the contents of this 
e-mail or its attachments is strictly prohibited. If you have received this 
email in error, please notify the sender immediately and delete the 
original. 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________