Subject: | |
From: | |
Reply To: | |
Date: | Thu, 26 Mar 2015 15:38:45 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks all. It turns out we have an engineer in another group here that worked at a fabricator for many years. I will take your comments and review them with him in reference to our control drawing.
Best regards,
Phil Nutting
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Thursday, March 26, 2015 10:56 AM
To: [log in to unmask]
Subject: Re: [TN] bare board acceptability, IPC-600 versus IPC 6012
Nothing was said about 610. The bare board acceptability is IPC-600.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of James Head
Sent: Thursday, March 26, 2015 4:17 AM
To: [log in to unmask]
Subject: Re: [TN] bare board acceptability, IPC-600 versus IPC 6012
The note on 610 doesn't belong on the Fabrication drawing but on the Assembly Drawing. 610 refers to the PCB Assembly.
The note on 6012 belongs on the Fabrication drawing only. 6012 refers to the fabricated bare board.
As an example you can have bare boards fabricated to conform to 6012 class 3 from your PCB fabricator, and your PCB Assembly to conform to 610 Class 2 from your PCB Assembler. At the end of the day your end product would only be Class 2.
You might use the Class 3 fabricated bare boards for one PCB assembly in a Class 2 product for customer X and for a separate PCB assembly in a Class 3 product for customer Y.
Regards,
James
James Head BEng CID+ MIIE MIET
Senior PCB CAD Engineer
Crowcon Detection Instruments Limited
172 Brook Drive
Milton Park
OX4 4SD
Telephone: 01235 557700
E-mail: [log in to unmask]
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|