aluminum foil textile cloth if you ask me...
   jk
On Jan 29, 2015, at 9:32 AM, Steve Gregory wrote:

> I don't like vinyl around wave solder either. I've always gone by  
> the rule
> of no synthetic garments around wave solder. But there were complaints
> about the operators smocks getting dirty around the wave and KISS, so
> someone in their infinite wisdom bought these vinyl aprons for them  
> to wear
> without talking with me about it.
>
> I just wanted to see how many of you thought it was a dumb idea like I
> did...
>
> Steve
>
> On Thu, Jan 29, 2015 at 6:24 AM, Bush, Brien <[log in to unmask]>  
> wrote:
>
>> Hi Steve,
>> Our operators wear esd smocks as does everyone else in  
>> manufacturing. Our
>> maintenance department performs all repairs and maintenance  
>> outfitted with
>> Welding type of material to avoid serious burns. I don't like the  
>> idea of
>> vinyl near molten solder.
>>
>> Brien B.
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
>> Sent: Wednesday, January 28, 2015 3:37 PM
>> To: [log in to unmask]
>> Subject: [TN] Wave solder apron?
>>
>> Hi All,
>>
>> This is a sort of an off the wall question; how many of you would  
>> require
>> that your wave solder operators wear this vinyl apron while  
>> operating the
>> wave solder?
>>
>>
>> http://www.all-spec.com/products/ESD-Safe_Garments%7CGarments% 
>> 7CGAR-00/AE30263.html
>>
>> Steve
>>
>> --
>>
>>
>> This email and any attachments are only for use by the intended
>> recipient(s) and may contain legally privileged, confidential,  
>> proprietary
>> or otherwise private information. Any unauthorized use, reproduction,
>> dissemination, distribution or other disclosure of the contents of  
>> this
>> e-mail or its attachments is strictly prohibited. If you have  
>> received this
>> email in error, please notify the sender immediately and delete the
>> original.
>>
>>
>> _____________________________________________________________________ 
>> _
>> This email has been scanned by the Symantec Email Security.cloud  
>> service.
>> For more information please contact helpdesk at x2960 or  
>> [log in to unmask]
>> _____________________________________________________________________ 
>> _
>> WARNING: Export Control This message, including any attachments, may
>> contain technical data within the definition of the International  
>> Traffic
>> in Arms Regulations (ITAR), and subject to the Export Control Laws  
>> of the
>> U.S. Government. Transfer of such information by any means to a  
>> foreign
>> person, whether in the United States or abroad, without proper export
>> authorization or other approval from the U.S. Department of State is
>> prohibited.
>>
>
> -- 
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential,  
> proprietary
> or otherwise private information. Any unauthorized use, reproduction,
> dissemination, distribution or other disclosure of the contents of  
> this
> e-mail or its attachments is strictly prohibited. If you have  
> received this
> email in error, please notify the sender immediately and delete the
> original.
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud  
> service.
> For more information please contact helpdesk at x2960 or  
> [log in to unmask]
> ______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________