So I never had to work around wave solder machines, but I did work in a
power plant. We were required to wear full leather boots, gloves, full
length sleeves cotton, wool, leather or flame retardant clothing when
inside the power block (power plant), FR was required of those of us
that could be exposed to 50 volts or above, safely glasses all the time,
hard hats if out of an office. Full flash suits above 200 volts,
rubber gloves with leather outers etc. You either complied or first
time was a letter in your file, second time was a decision making leave,
third time was go look for another job. Same standards applied for the
CEO on down, one of the VP's got a dml for wearing sports shoes. Steam
temperatures were around 570 deg F. The company purchased the FR
clothing and safety glasses (prescription), and leather boots for those
that were required to work at heights (climbers). The female clerks
and tech's complained but complied.
pat goodyear
retired.
On Thu, Jan 29, 2015 at 6:32 AM, Steve Gregory wrote:
> I don't like vinyl around wave solder either. I've always gone by the
> rule
> of no synthetic garments around wave solder. But there were complaints
> about the operators smocks getting dirty around the wave and KISS, so
> someone in their infinite wisdom bought these vinyl aprons for them to
> wear
> without talking with me about it.
>
> I just wanted to see how many of you thought it was a dumb idea like I
> did...
>
> Steve
>
> On Thu, Jan 29, 2015 at 6:24 AM, Bush, Brien <[log in to unmask]>
> wrote:
>
>> Hi Steve,
>> Our operators wear esd smocks as does everyone else in manufacturing.
>> Our
>> maintenance department performs all repairs and maintenance outfitted
>> with
>> Welding type of material to avoid serious burns. I don't like the
>> idea of
>> vinyl near molten solder.
>>
>> Brien B.
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
>> Sent: Wednesday, January 28, 2015 3:37 PM
>> To: [log in to unmask]
>> Subject: [TN] Wave solder apron?
>>
>> Hi All,
>>
>> This is a sort of an off the wall question; how many of you would
>> require
>> that your wave solder operators wear this vinyl apron while operating
>> the
>> wave solder?
>>
>>
>>
>> http://www.all-spec.com/products/ESD-Safe_Garments%7CGarments%7CGAR-00/AE30263.html
>>
>> Steve
>>
>> --
>>
>>
>> This email and any attachments are only for use by the intended
>> recipient(s) and may contain legally privileged, confidential,
>> proprietary
>> or otherwise private information. Any unauthorized use, reproduction,
>> dissemination, distribution or other disclosure of the contents of
>> this
>> e-mail or its attachments is strictly prohibited. If you have
>> received this
>> email in error, please notify the sender immediately and delete the
>> original.
>>
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud
>> service.
>> For more information please contact helpdesk at x2960 or
>> [log in to unmask]
>>
>> ______________________________________________________________________
>> WARNING: Export Control This message, including any attachments, may
>> contain technical data within the definition of the International
>> Traffic
>> in Arms Regulations (ITAR), and subject to the Export Control Laws of
>> the
>> U.S. Government. Transfer of such information by any means to a
>> foreign
>> person, whether in the United States or abroad, without proper export
>> authorization or other approval from the U.S. Department of State is
>> prohibited.
>>
>
> --
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential,
> proprietary or otherwise private information. Any unauthorized use,
> reproduction, dissemination, distribution or other disclosure of the
> contents of this e-mail or its attachments is strictly prohibited. If
> you have received this email in error, please notify the sender
> immediately and delete the original.
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|