Hi Steve - if looking good was a requirement for making reliable
electronics, Doug and I would have been barred from the plant a long time
ago. Safety first, appearance second.

Dave

On Thu, Jan 29, 2015 at 8:32 AM, Steve Gregory <[log in to unmask]> wrote:

> I don't like vinyl around wave solder either. I've always gone by the rule
> of no synthetic garments around wave solder. But there were complaints
> about the operators smocks getting dirty around the wave and KISS, so
> someone in their infinite wisdom bought these vinyl aprons for them to wear
> without talking with me about it.
>
> I just wanted to see how many of you thought it was a dumb idea like I
> did...
>
> Steve
>
> On Thu, Jan 29, 2015 at 6:24 AM, Bush, Brien <[log in to unmask]> wrote:
>
> > Hi Steve,
> > Our operators wear esd smocks as does everyone else in manufacturing. Our
> > maintenance department performs all repairs and maintenance outfitted
> with
> > Welding type of material to avoid serious burns. I don't like the idea of
> > vinyl near molten solder.
> >
> > Brien B.
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
> > Sent: Wednesday, January 28, 2015 3:37 PM
> > To: [log in to unmask]
> > Subject: [TN] Wave solder apron?
> >
> > Hi All,
> >
> > This is a sort of an off the wall question; how many of you would require
> > that your wave solder operators wear this vinyl apron while operating the
> > wave solder?
> >
> >
> >
> http://www.all-spec.com/products/ESD-Safe_Garments%7CGarments%7CGAR-00/AE30263.html
> >
> > Steve
> >
> > --
> >
> >
> > This email and any attachments are only for use by the intended
> > recipient(s) and may contain legally privileged, confidential,
> proprietary
> > or otherwise private information. Any unauthorized use, reproduction,
> > dissemination, distribution or other disclosure of the contents of this
> > e-mail or its attachments is strictly prohibited. If you have received
> this
> > email in error, please notify the sender immediately and delete the
> > original.
> >
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> [log in to unmask]
> > ______________________________________________________________________
> > WARNING: Export Control This message, including any attachments, may
> > contain technical data within the definition of the International Traffic
> > in Arms Regulations (ITAR), and subject to the Export Control Laws of the
> > U.S. Government. Transfer of such information by any means to a foreign
> > person, whether in the United States or abroad, without proper export
> > authorization or other approval from the U.S. Department of State is
> > prohibited.
> >
>
> --
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential, proprietary
> or otherwise private information. Any unauthorized use, reproduction,
> dissemination, distribution or other disclosure of the contents of this
> e-mail or its attachments is strictly prohibited. If you have received this
> email in error, please notify the sender immediately and delete the
> original.
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________