Lloyd,
Thank you for the response, I assumed I would need an SR type. Would you happen to have a part number?
This is an automotive type PCBA that I may want to CC for moisture protection.
Regards
Ken

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso - Diamond-MT.com
Sent: Tuesday, November 18, 2014 7:35 AM
To: [log in to unmask]
Subject: Re: [TN] Hi-Temp Conformal Coat

Ken

That is about at the limit for most standard AR and UR coatings. An SR will easily hit that as most of the SR I use will exceed 200C easily. Feel free to contact me anytime if you need assistance choosing something specifically for your application.

Lloyd Duso
Diamond-MT
Plant Manager
(814) 535-3505
www.Diamond-mt.com

On Mon, Nov 17, 2014 at 8:14 PM, Kenneth Wood <[log in to unmask]>
wrote:

>
>
> Hi all,
>
> Any suggestions on a hi-temp conformal coating?
>
> ~+125C
>
> Thanks
>
> Ken
>
>
>
> ____________________________________
>
> Kenneth J. Wood
>
> President
>
> www.saturnpcb.com
>
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________