From what I have seen many ESD bags are not moisture control bags in the
first place. When it comes to water vapor plastic leaks like a sieve. A
little hole will not hurt much, if at all and not for very long.

Bob K.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Nutting, Phil
Sent: Tuesday, November 18, 2014 11:58 AM
To: [log in to unmask]
Subject: Re: [TN] Vented ESD Bags

As I know it ESD bags are essentially faraday shields, so poking a hole in
the bag to allow the pressure to equalize should not affect the ESD
characteristics.  This assumes that the ingress of moisture is not an issue.

Phil

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Gregg Owens
Sent: Tuesday, November 18, 2014 11:28 AM
To: [log in to unmask]
Subject: [TN] Vented ESD Bags

Anyone have a source on vented ESD static shielding bags. We have an issue
of gas buildup on one of our products and the engineers want the ESD static
shielding bag to be able to have vent while maintaining ESD protection.

Gregg


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________