IF very high quantity, silicon substrates may be a good option.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Yuan-chia Joyce Koo
Sent: Wednesday, October 08, 2014 7:41 PM
To: [log in to unmask]
Subject: Re: [TN] High Temperature Laminate
metal clad you might get stuck with low No. of layers - if you can get away
with single layer HDI, but your dielectric need to be "special" (not every
vendor's a cup of tea). LTCC or HTCC would be the better or cheaper
candidate. my 1.8 cents.
jk
On Oct 8, 2014, at 7:27 PM, Stadem, Richard D. wrote:
> You could even consider clad aluminum. But I encourage you to talk to
> the folks at Bergquist.
> Another company who has a LOT of experience in high thermal
> applications is Analog Technologies. They build clad copper, aluminum,
> and ceramic assemblies on a daily basis and are quite expert at it. We
> have used them to design substrates for extremely hot and harsh
> environments and they have done a great job at that.
> www.analog-tech.com
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
> Sent: Wednesday, October 08, 2014 5:37 PM
> To: [log in to unmask]
> Subject: Re: [TN] High Temperature Laminate
>
> DBC on alumina is indeed a very good candidate, but so can hermetic
> HTCC [High Temp Co-fire Ceramics] and LTCC ceramics [Low Temp Co-
> fired Ceramics]
> - depending upon the power dissipated in the circuit, etc.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
> Sent: Wednesday, October 08, 2014 4:13 PM
> To: [log in to unmask]
> Subject: Re: [TN] High Temperature Laminate
>
> No. That is a job for ceramic-based clad laminate. The experts in that
> material are Bergquist.
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Paul Jackson
> Sent: Wednesday, October 08, 2014 2:57 PM
> To: [log in to unmask]
> Subject: [TN] High Temperature Laminate
>
> Hi All,
>
> We are looking for help tracking down a copper clad dielectric capable
> of surviving in continuous temperatures of 200^o C - 260^o C. Our PCB
> laminate suppliers have not been able to provide anything which will
> work for more than 60 minutes at these temperatures. Can anyone
> recommend a product which is capable and commercially available?
>
> Thanks in advance,
> Paul Jackson
> Omni Circuit Boards
> (855) 798 9717
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|