TECHNET Archives

September 2014

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ahne Oosterhof <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Ahne Oosterhof <[log in to unmask]>
Date:
Fri, 5 Sep 2014 11:21:50 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (209 lines)
I bet that is quite a bit more than 2 Canadian cents!
Ahne.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Yuan-chia Joyce Koo
Sent: Friday, September 5, 2014 10:04 AM
To: [log in to unmask]
Subject: Re: [TN] EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at
paste printer.

you might want to explore to add a color LED for illumination.  try a
battery powered one and see if it gets better (angle illumination).
my 2 cents.
       jk
On Sep 5, 2014, at 12:00 PM, Gumpert, Ben wrote:

> I've seen this problem from time to time, and it can be a real 
> headache.
> It seems like the fiducials are just the right size for this to be a 
> problem with the HASL finish.
>
> Has anyone tried a different size fiducial, or different shape/ 
> pattern that might not have the same problem?
> (Although I'm sure anything different would cause problems with a lot 
> of equipment.)
>
> Ben
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Guy Ramsey
> Sent: Friday, September 05, 2014 11:34 AM
> To: [log in to unmask]
> Subject: EXTERNAL: Re: [TN] NOT Recognizing Panel Fiducials at paste 
> printer.
>
> In my experience, the copper, without HASL is worse than the HASL, for 
> those old printers and placers.
> We resorted to machine eraser.
> http://www.dickblick.com/products/sakura-cordless-electric-eraser/
> We cleaned the board fiducials at receiving inspection.
>
> Gold will be more repeatable but I would think a switch from HASL to 
> ENIG would be a major change. If it is a real simple design and HASL 
> has good yields, I would expect ENIG to introduce more problems than 
> it solves. It did in my case.  We probably could have resolved the 
> soldering problems by tweaking the reflow and wave settings. But, we 
> went back to HASL. The buyer and the plant manager made the call.
>
> Immersion tin and immersion silver change color too. I bet your 
> machines would have trouble with it. My experience with this problem 
> dates back to the age of your old printers. Immersion Tin and Silver 
> have been greatly improved since then.
>
> Wish I could be more help.
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Jim West
> Sent: Friday, September 05, 2014 9:47 AM
> To: [log in to unmask]
> Subject: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.
>
> Thanks for the replies.  We build many thousands of this board so I 
> was looking for a more permanent suggestion to give our board 
> supplier.  My thought was having the board supplier NOT apply solder 
> (HASL) to the fiducials.  Is this possible? Any other suggestion for a 
> more permanent solution that our board house could implement without 
> major changes (i.e.
> Immersion tin, or gold....).  Major change would require an older 
> board going through customer approval.
>
> Best Regards,
> Jim
>
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Ioan TEMPEA
> Sent: Friday, September 05, 2014 7:52 AM
> To: [log in to unmask]
> Subject: Re: [TN] NOT Recognizing Panel Fiducials at paste printer.
>
> Jim,
>
> Removing the solder from the fiducials, using a solder wick, normally 
> takes care of the issue.
>
> Regards,
>
> Ioan Tempea, P. Eng.
> Manufacturing Engineer
> Satellite Systems
> MDA
> 21025 TransCanada Highway
> Ste-Anne-de-Bellevue, Qc, Canada H9X 3R2
> Tel: +1-514-457-2150-3556
> www.mdacorporation.com
>
> This e-mail, and any attachments, are intended solely for the use of 
> the intended recipient(s) and may contain legally privileged, 
> proprietary and/or confidential information. Any use, disclosure, 
> dissemination, distribution or copying of this e-mail and any 
> attachments for any purposes that have not been specifically 
> authorized by the sender is strictly prohibited. If you are not the 
> intended recipient, please immediately notify the sender by reply e- 
> mail and permanently delete all copies and attachments.
>
> -----Message d'origine-----
> De : TechNet [mailto:[log in to unmask]] De la part de Stephen Gregory 
> Envoyé :
> Thursday, September 04, 2014 4:29 PM À : [log in to unmask] Objet :  
> Re: [TN] NOT Recognizing Panel Fiducials at paste printer.
>
> Hi Jim,
>
> An old trick that I've used many times when the camera doesn't 
> recognize a fiducial is to take a pencil eraser to it...
>
> Steve
>
> Sent from my BlackBerry 10 smartphone.
>   Original Message
> From: Jim West
> Sent: Thursday, September 4, 2014 2:05 PM
> To: [log in to unmask]
> Reply To: TechNet E-Mail Forum
> Subject: [TN] NOT Recognizing Panel Fiducials at paste printer.
>
> Our paste printers are having difficulty recognizing the fiducials on 
> an older board that has been running for years. The board house is 
> applying HASL and because of that, as most are aware, the solder 
> covering the fiducial pad will be inconsistent. I'm told that this has 
> been an ongoing issue and the problem comes and goes.
> We have three printers that are older that do not allow us to adjust 
> the lighting.
>
> I can't remember if we can have the board house apply HASL on just the 
> component pads and not the fiducials? Any other suggestions?
>
> Thanks,
> Jim
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>
> --
>
>
> This email and any attachments are only for use by the intended
> recipient(s) and may contain legally privileged, confidential, 
> proprietary or otherwise private information. Any unauthorized use, 
> reproduction, dissemination, distribution or other disclosure of the 
> contents of this e-mail or its attachments is strictly prohibited. If 
> you have received this email in error, please notify the sender 
> immediately and delete the original.
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud 
> service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2