To my understanding there is no correlation between the centering of the Press Fit Pin on the exit PTH versus the location of the contact wipe pin.
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Wednesday, September 24, 2014 8:56 AM
To: [log in to unmask]
Subject: Re: [TN] FW: [TN] DIMM Socket press-fit Misaiming
Hi Lyon!
Your picture is posted. The link is here:
http://stevezeva.homestead.com/DIMM_Pins.jpg
Steve
On Wed, Sep 24, 2014 at 7:29 AM, Lyon Yuan wrote:
> Hi Steve,
>
> Please help to post picture.
>
> Lyon Yuan
>
> -----Original Message-----
> From: [log in to unmask] [mailto:[log in to unmask]] On Behalf
> Of Louis Hart
> Sent: Wednesday, September 24, 2014 8:53 PM
> To: [log in to unmask]
> Subject: Re: [TN] DIMM Socket press-fit Misaiming
>
> Lyon, TechNet had a place to put pictures at one time. I used it. But
> now, I do not see on the IPC a mechanism for posting pictures for all
> to see.
>
> People have been using Steve Gregory's 'service', as you may have noticed.
> But the IPC depository was a place TechNetters could use directly.
> Has something changed at IPC so we can no longer post pictures?????
> Louis Hart
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Lyon
> Sent: Wednesday, September 24, 2014 7:34 AM
> To: [log in to unmask]
> Subject: Re: [TN] DIMM Socket press-fit Misaiming
>
> who should I send picture to ? so you can see it? Lyon Yuan 发自 Android
> 网易邮箱 On 2014-09-24 19:27 , Lyon Wrote: Folks, Recently,Customer
> reported that found a field return unit with DIMM socket press fit pin
> seems misaligned. you can see that some pins at the edge were
> misaligned to one side and potentially caused contact issue. But i see
> all of boards with same misalignment pin in production line.My
> customer question us how do you think this is acceptable? Any IPC
> standand mention it? How did it happen on this misalignment? Lyon Yuan
> 发自 Android 网易邮箱
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service. For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
--
This email and any attachments are only for use by the intended
recipient(s) and may contain legally privileged, confidential, proprietary or otherwise private information. Any unauthorized use, reproduction, dissemination, distribution or other disclosure of the contents of this e-mail or its attachments is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|