Before you go through all the work of developing your own company DFX guideline...
IPC is building a complete DFX program, which includes:
1. IPC industry Guideline for DFX-Design For Excellence:
This document will help users to customize their own DFX guidelines for every project
A range of IPC manufacturability standards are covered, along with the reasoning behind them.
Including DFM (Design For Manufacturability), DFA (Design For Assembly), DFT (Design For Test), and more.
The IPC DFX Guideline is in development now with a Committee of technologists, scheduled for release by Q3 of 2015
2. A full-day educational course
This class does not simply review the Guideline document - it provides additional information:
practical knowledge from experts with global manufacturability experience
Available NOW: on-site at the IPC APEX EXPO show as a professional development course, and on request from IPC program manager
All engineering staff and management involved in product development will benefit from the IPC DFX program:
Design, Fabrication, Assembly, Test, Sales
Please let me know how I can provide more information for your team,
Anne Marie Mulvihill
Program Manager
IPC-Association Connecting Electronics Industries
3000 Lakeside Drive, Suite 309S
Bannockburn, IL 60015-1249 USA
+ 1-847-597-2827 tel
[log in to unmask]
www.IPC.org
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Silicon Valley Chapter - IPC Designers Council
Sent: Tuesday, September 16, 2014 10:22 PM
To: DesignerCouncil
Subject: Re: [DC] DFM, DFA, DFT, DFX
DFX also means Design For eXcellence :-)
Just so happens that I am doing some review of this topic right now, gathering data for a company guideline.
Already have input from Jabil and NBS. Also an unfinished 2003 pdf from Tom Hausherr of PCB Libraries.
If you don't mind sharing, feel free to send me your reference docs or URLs for my studies.
Thanks,
Bob McCreight, C.I.D.
IPC Designers Council
Silicon Valley Chapter
[log in to unmask]
--------------------------------------------
On Tue, 9/16/14, Brooks, William <[log in to unmask]> wrote:
Subject: [DC] DFM, DFA, DFT, DFX
To: [log in to unmask]
Date: Tuesday, September 16, 2014, 3:31 PM
I recall discussing DFM
awhile back and it occurs to me that there is one additional area that belongs in the DF'X' family of Design Practice Criteria...
Design
for Reliability... :)
William
Brooks, CID+
Senior MTS (Contract)
2747 Loker Ave West
Carlsbad,
CA 92010-6603
760-930-7212
Fax: 760.918.8332
Mobile: 760.216.0170
E-mail: [log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks, William
Sent: Monday,
September 15, 2014 10:00 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
The webinar was from 2011 and covered both HDI solid plated holes in 100um and 200um thick materials for blind thru hole applications by Mark Lefebvre and High Aspect ratio thru hole plating using Periodic Pulse Reverse Plating By Dennis Yee. (I just watched it)
Screaming Circuits has a photo
illustration of an example of what I was thinking about... http://screamingcircuits.typepad.com/.a/6a00d8341c008a53ef013484716f88970c-pi
I'm told that both Via
systems and TTM can do solid copper filled vias and stacked microvias... Though I have not had any made for boards I have been working on yet. Don Carron did a great presentation for the Designers Council here in San Diego all about different types of vias and their applications and the processes to create them... and we talked a bit about this subject of solid copper vias... One of the concerns was that the solid copper CTE is very different from the surrounding epoxy glass and at some point the solid copper would really create stress in the board around the hole over thermal excursions from let's say -20C to +80C normal component operation temperature extremes... or especially during reflow soldering. So there are probably practical limits on your board thickness to get away with using this technology... What the limits are I am not sure...
William
Brooks, CID+
Senior MTS (Contract)
2747 Loker Ave West
Carlsbad,
CA 92010-6603
760-930-7212
Fax: 760.918.8332
Mobile: 760.216.0170
E-mail: [log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks, William
Sent: Monday,
September 15, 2014 8:02 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
Copper plated filling of traditional thru holes vias is real... it is being done.
Please
check Dow's website... nice webinar explains the process and chemical requirements.
http://storage.dow.com.edgesuite.net/flash_video/electronic_materials/4_27_11%20Webinar/files/default.html?contenttype=A&titlecolor=000000&eventid=291345&key=B619E6875E5601E4BC8415DD4C884730&text_language_id=en&sessionid=1&playerwidth=900&playerheight=675&helpcenter=false&format=wmaudio&mobile=false&flashsupportedmobiledevice=false&helpcenter=false
William Brooks, CID+
Senior MTS
(Contract)
2747 Loker Ave West
Carlsbad, CA 92010-6603
760-930-7212
Fax:
760.918.8332
Mobile: 760.216.0170
E-mail: [log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of iTech iCollege iSrael ????? ?????????? ?????
Sent: Sunday, September 14, 2014 6:56 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
Filled Vias can be made only for microVias, not traditional Vias which can be tented or covered
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Varughese, Renjith
Sent:
Friday, September 12, 2014 4:58 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
Hello Veronica,
Solid Copper filled vias you mentioned are about micro vias or traditional through hole vias?
Thanks and regards,
Renjith Varughese
Honeywell Honeywell Technology
Solutions Lab Pvt. Ltd Adarsh Prime Project Pvt Ltd Survey No 19/2, Devarabisanahalli Village, K.R. Puram Hobli Bangalore East Taluk Bangalore - 560 103 Phone # - 26588360 Extn 50211
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Anderson, Veronika
Sent:
Friday, September 12, 2014 4:28 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
Bill,
Can you
clarify your definition of "copper filled via"?
As far as I know, there is no via filling material that can be called a "copper fill".
As you mentioned, the thicker plating improves the thermal transfer and current carrying characteristics of via.
I've seen the drawings with a note
"vias can be plated shut".
However, the conventional plating process cannot close the via completely - there is always an air gap in the middle.
The Reverse Pulse Plating
Process provides the "solid copper plated via". So far only a few PWB manufacturers do that.
If
you use a solid copper plated vias in your designs, please share a name of PCB manufacturer that builds your boards.
Regards,
Veronika Anderson C.I.D | Sr.
Electrical/Mechanical Design Engineer | Excelitas Technologies
Office: +1
626.967.9521 x 236
1330 East Cypress Street,
Covina, CA 91724 USA [log in to unmask] www.excelitas.com
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks, William
Sent: Thursday,
September 11, 2014 9:31 AM
To: [log in to unmask]
Subject: Re: [DC] Vias
Peter was talking with me about using vias in thermal pads and how some still leave an open aperture the size of the thermal pad for their solder paste...
This can cause the solder paste when it melts to be wicked down the via holes starving the part for solder... depending on the diameter of the vias and how many there are...
One method to reduce this
effect is to change the stencil aperture to a pattern that avoids the vias and helps distribute the paste over the thermal pad area evenly...
See this
illustration by Texas Instruments...
http://www.ti.com/ods/images/SNLS302D/sample_layout_DAP_snls302.png
Another thing that helps is to
reduce the diameter of the via to reduce its wicking volume... smaller holes wick less...
I have
used .008 in. diameter vias for that purpose before...
Or... you can have the via
holes filled and planarized... thus no extra solder is wicked down the holes...
Partial filling
tends to cause problems...
For example:
Trapped gases will expand in the high heat of the reflow oven and cause solder balls to occur...
This
is bad for your design when installed in the electronics application it typically must work in because solder balls are conductive and can cause shorts between pins and exposed pads or get loose in vibration and bounce around to other assemblies and cause the same sort of problems.
Also I have found that filling
vias with solder does not improve their thermal transfer characteristics very much... Solder is not that great a heat conductor. Copper is the best thermal conductor typically for our PCB applications... so thicker copper plating in the holes or copper filled vias are bound to be far superior for thermal transfer reasons than filling the vias with solder.
William Brooks, CID+
____________________________________________________________________________
_
Scanned by IBM Email Security
Management Services powered by MessageLabs.
For more information please visit http://www.ers.ibm.com
This email is intended only
for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of the email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of inaccuracies as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this email, or any attachment, that have arisen as a result of e-mail transmission.
____________________________________________________________________________
_
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List
provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil.
To temporarily
stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List
provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil.
To temporarily
stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List
provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil.
To temporarily
stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To
unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil.
To temporarily
stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
This email is intended only
for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of the email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of inaccuracies as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this email, or any attachment, that have arisen as a result of e-mail transmission.
_____________________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To
unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To
temporarily stop/(restart) delivery of DesignerCouncil send:
SET DesignerCouncil NOMAIL/(MAIL)
For
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
This email is intended only
for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of the email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of inaccuracies as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this email, or any attachment, that have arisen as a result of e-mail transmission.
_____________________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To
unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To
temporarily stop/(restart) delivery of DesignerCouncil send:
SET DesignerCouncil NOMAIL/(MAIL)
For
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
This email is intended only
for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of the email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of inaccuracies as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this email, or any attachment, that have arisen as a result of e-mail transmission.
_____________________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more
information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To
unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To
temporarily stop/(restart) delivery of DesignerCouncil send:
SET DesignerCouncil NOMAIL/(MAIL)
For
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
---------------------------------------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|