TECHNET Archives

August 2014

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Gumpert, Ben" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Gumpert, Ben
Date:
Tue, 5 Aug 2014 13:56:48 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
Victor,

J-STD-001 Rev E Para. 6.1.4 states that leads trimmed shall have the solder reflowed or inspected at 10X for damage.
And if the trim cuts into the solder fillet, it must be reflowed.

Ben

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Tuesday, August 05, 2014 9:33 AM
To: [log in to unmask]
Subject: EXTERNAL: [TN] Post solder Component lead trimming

Fellow TechNetters:

   Does IPC Standards address the lead trimming of components on post solder assemblies.   I heard that on post solder lead trimming that a second pass solder operation is required to ensure solder joint integrity from the lead trimming process.   Any comments and/or direction for literature review.

Victor,


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2