I looked at the MSDS for this stuff one time and was surprised that it
consists mostly of nitromethane!

So there ya' go...go to a NHRA drag race and go ask John Force if he has
any spare fuel laying around that he can give you to remove tak-pak from
your boards.  :^)

Steve 


-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Wayne Thayer
Sent: Thursday, July 3, 2014 7:24 AM
To: [log in to unmask]
Subject: Re: [TN] How to remove Tak Pak 444 adhesive

By the way, at $30US for <2 oz/50ml, you'll want to buy a bunch of empty
little nail polish brush bottles.  You don't need a lot of it, and the
big bottle is easily spilled while working on it!

Wayne

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Wayne Thayer
Sent: Thursday, July 03, 2014 9:19 AM
To: [log in to unmask]
Subject: Re: [TN] How to remove Tak Pak 444 adhesive

Techni-tool sells a solvent for this which performs much better than
acetone.  It'll work through any cyanoacrylate based adhesive.  It's
called Loctite X-NMS clean up solvent.

You can also just hold an iron against an Xacto blade and pick the stuff
away, but it sure does stink!

Wayne

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Robert Kondner
Sent: Thursday, July 03, 2014 8:14 AM
To: [log in to unmask]
Subject: Re: [TN] How to remove Tak Pak 444 adhesive

Hi,

 You might try a small cotton swab and acetone.

Bob K.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tuyen Tran
Sent: Thursday, July 03, 2014 1:09 AM
To: [log in to unmask]
Subject: [TN] How to remove Tak Pak 444 adhesive

Anyone know how to remove Tak Pak 444 adhesive on electronic assembly.
We having problem with tacking wire by the loctite adhesive.

Thanks and best regards
Tuyen Tran

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________