Hi Phil!

YES! I had forgotten about those, and didn't remember how close to the body
they could strip!

Thanks man!

Steve


On Tue, Jul 22, 2014 at 10:14 AM, Nutting, Phil <[log in to unmask]>
wrote:

> The best solution is a small collet spinning to strip the enamel.
>
> Check out
> http://www.carpentermfg.com/CMC/site.aspx/machines/details/?product=20&machine=6
>
> Phil
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Landman
> Sent: Friday, July 18, 2014 1:08 PM
> To: [log in to unmask]
> Subject: Re: [TN] Removing insulation from inductor wire..
>
> Methelyne chloride has been is the prime constituent in paint strippers.
>
> http://en.wikipedia.org/wiki/Paint_stripper
>
> Bob
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Brian Ellis
> Sent: Friday, July 18, 2014 10:36 AM
> To: [log in to unmask]
> Subject: Re: [TN] Removing insulation from inductor wire..
>
> I doubt it. MEK is not chlorinated and therefore not as aggressive.
>
> Brian
>
> On 18/07/2014 15:50, Steven Creswick wrote:
> > Brian - Bob,
> >
> > Would the MEK in readily available PVC solvent weld 'cement' work as
> well?
> >
> > Steve Creswick
> >
> >
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>

-- 


This email and any attachments are only for use by the intended 
recipient(s) and may contain legally privileged, confidential, proprietary 
or otherwise private information. Any unauthorized use, reproduction, 
dissemination, distribution or other disclosure of the contents of this 
e-mail or its attachments is strictly prohibited. If you have received this 
email in error, please notify the sender immediately and delete the 
original. 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________