Hello Bill,
Maybe not for high volume, but for quick prototypes of single sided circuits they look interesting.
It would be good if a dielectric ink could be used as well to build up more complex circuits in much the same way as thick film hybrids are done.
The Mitsubishi ink requires a specially coated substrate to work properly as well.
Just interested if anyone has actually used this technology and what their thoughts and findings are.
(you probably don't remember me, I had dinner with you in Melbourne a couple of years ago. Unfortunately I had gone quite deaf from flying with an ear infection..)
-----Original Message-----
From: Brooks, William [mailto:[log in to unmask]]
Sent: Saturday, 26 July 2014 12:20 AM
To: (Designers Council Forum); DUTTON, Phil
Subject: RE: Printing circuit boards using conductive inks
Wow... See, you ask and you shall receive... I didn't think this was quite a reality in this sense yet... there ya go. Instant PCBs.
:)
http://www.mitsubishiimaging.com/digital-imaging-diamond-jet-NANOINK.html
William Brooks, CID+
Senior MTS (Contract)
2747 Loker Ave West
Carlsbad, CA 92010-6603
760-930-7212
Fax: 760.918.8332
Mobile: 760.216.0170
E-mail: [log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of DUTTON, Phil
Sent: Monday, July 21, 2014 8:20 PM
To: [log in to unmask]
Subject: [DC] Printing circuit boards using conductive inks
Hello,
Just wondering if anyone has had any experiences with inkjet printing circuits using products like Mitsubishi's NanoBenefit 3G series?
http://www.mitsubishiimaging.com/digital-imaging-diamond-jet-NANOINK.html
regards,
Phil Dutton C.I.D.+
This email has been sent on behalf of one of the following companies within the BAE Systems Australia group of companies:
BAE Systems Australia Limited - Australian Company Number 008 423 005
BAE Systems Australia Defence Pty Limited - Australian Company Number 006 870 846
BAE Systems Australia Logistics Pty Limited - Australian Company Number 086 228 864
Our registered office is Evans Building, Taranaki Road, Edinburgh Parks, Edinburgh, South Australia, 5111. If the identity of the sending company is not clear from the content of this email please contact the sender.
This email and any attachments may contain confidential and legally privileged information. If you are not the intended recipient, do not copy or disclose its content, but please reply to this email immediately and highlight the error to the sender and then immediately delete the message.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
_____________________________________________________________________________
Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com
This email is intended only for the use of the party to which it is addressed and may contain information that is privileged, confidential, or protected by law. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of the email or its contents is strictly prohibited. If you have received this message in error, please notify us immediately, by replying to the message and deleting it from your computer.
WARNING: Internet communications are not assured to be secure or clear of inaccuracies as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this email, or any attachment, that have arisen as a result of e-mail transmission.
_____________________________________________________________________________
This email has been sent on behalf of one of the following companies within the BAE Systems Australia group of companies:
BAE Systems Australia Limited - Australian Company Number 008 423 005
BAE Systems Australia Defence Pty Limited - Australian Company Number 006 870 846
BAE Systems Australia Logistics Pty Limited - Australian Company Number 086 228 864
Our registered office is Evans Building, Taranaki Road, Edinburgh Parks,
Edinburgh, South Australia, 5111. If the identity of the sending company is
not clear from the content of this email please contact the sender.
This email and any attachments may contain confidential and legally
privileged information. If you are not the intended recipient, do not copy or
disclose its content, but please reply to this email immediately and highlight
the error to the sender and then immediately delete the message.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
