Subject: | |
From: | |
Reply To: | |
Date: | Thu, 17 Jul 2014 14:03:10 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ahne,
Apologize for using your post to make a comment to the originator.
I must have deleted the message.
How about using the pin 1 pad centroid of the device as a local fiducial?
Assuming your software allows you to do this.
Best regards,
Gerry
> Date: Thu, 17 Jul 2014 07:33:45 -0700
> From: [log in to unmask]
> Subject: Re: [TN] Local Fiducials
> To: [log in to unmask]
>
> With 0.4 mm pitch you have about 0.2 mm room between pads. To be sure the part is landing on the pads you probably want a placement precision of close to 20 um. Question 1: can your pick-and-placement machine meet that criteria (all day long) and question 2: are the pads where they are supposed to be with respect to the board or panel fiducials.
>
> Lots of opportunity for headaches especially when it comes to question #2!
>
> Ahne.
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bill Noel
> Sent: Thursday, July 17, 2014 3:31 AM
> To: [log in to unmask]
> Subject: [TN] Local Fiducials
>
> Are local fiducials (those specifically associated with a single fine-pitch device) necessary anymore? I've been told by a rep from our Assy CM that they're not necessary anymore with the advent of high-tech pick and place machines. We've actually been designing some boards with .4mm pitch BGA's Does this fine of pitch still not require fiducials? Thanks in advance for the response.
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|