Any chance the solder material on the caps had a lower temp material? That
might be an issue?

Bob K.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Zilber Gil
Sent: Monday, June 02, 2014 11:16 AM
To: [log in to unmask]
Subject: Re: [TN] Capacitor - strange soldering behavior

 This appearance was on many capacitor (same part number) on the board,
regular metallic and pad size. Other capacitors (different companies, same
footprint) behave normally.
Thanks,

Gil

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Pete
Sent: Friday, May 30, 2014 4:25 PM
To: [log in to unmask]
Subject: Re: [TN] Capacitor - strange soldering behavior

Is there a large volume of copper in that area of the PCB that could be
sinking reflow heat?
The information contained in this communication is proprietary to Israel
Aerospace Industries Ltd. and/or third parties, may contain confidential or
privileged information, and is intended only for the use of the intended
addresse thereof. If you are not the intended addressee, please be aware
that any use, disclosure, distribution and/or copying of this communication
is strictly prohibited. If you receive this communication in error, please
notify the sender immediately and delete it from your computer.

Thank you.


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________