Victor,
That is because your question was too vague.  Like others, I looked to
Google and got the same lubricant references other did.
1.  Who makes this material?
2.  Can you provide a link to a technical data sheet or to a supplier web
page?
3.  What is the application and what is the material expected to do and for
how long?

Specific answers need specific questions.


Doug Pauls
Principal Materials and Process Engineer
Rockwell Collins


On Fri, Jun 20, 2014 at 7:44 AM, Victor Hernandez <
[log in to unmask]> wrote:

> Fellow TechNetters:
>
>    I have not received many responses to my conformal coating inquiry,
> ACCL-53T.   Perhaps someone can share parameters associated with the
> process such as application equipment, spray nozzle, thickness, Drying,
> coverage, etc.   Is there an associated IPC Standard that I can review?
>   I would very much appreciate any information you can share.
>
> Victor,
>
> From: Hernandez, Victor G
> Sent: Wednesday, June 18, 2014 8:03 AM
> To: Stadem, Richard D.; TechNet E-Mail Forum
> Cc: Hernandez, Victor G
> Subject: RE: Conformal Coating, ACCL-53T
>
> Good response for SAFETY, but searching for something more constructive
> with regards to the above stated product..
>
> Victor,
>
> -----Original Message-----
> From: Stadem, Richard D. [mailto:[log in to unmask]]
> Sent: Tuesday, June 17, 2014 3:47 PM
> To: TechNet E-Mail Forum; Hernandez, Victor G
> Subject: RE: Conformal Coating
>
> Yes, acceleration to 53 mph, tops, has always been a safe way to drive.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
> Sent: Tuesday, June 17, 2014 3:01 PM
> To: [log in to unmask]<mailto:[log in to unmask]>
> Subject: [TN] Conformal Coating
>
> Fellow TechNetters:
>
> Anyone out there has experience with ACCL-53T?
>
> Victor,
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> <mailto:[log in to unmask]>
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________