Which I would not consider a CC.....

Lloyd Duso
Diamond-MT
Plant Manager
(814) 535-3505
www.Diamond-mt.com


On Fri, Jun 20, 2014 at 8:52 AM, Fox, Ian <[log in to unmask]>
wrote:

> Googling it gives this -  Anti Corrosion Connector Lubricant (ACCL)
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso - Diamond-MT.com
> Sent: 20 June 2014 13:49
> To: [log in to unmask]
> Subject: Re: [TN] Conformal Coating
>
> Victor
>
> I do not think that material is too common. We do nothing but CC and I
> have never had a customer ask for this material. Who is the manufacturer?
>
> Lloyd Duso
> Diamond-MT
> Plant Manager
> (814) 535-3505
> www.Diamond-mt.com
>
>
> On Fri, Jun 20, 2014 at 8:44 AM, Victor Hernandez <
> [log in to unmask]> wrote:
>
> > Fellow TechNetters:
> >
> >    I have not received many responses to my conformal coating inquiry,
> > ACCL-53T.   Perhaps someone can share parameters associated with the
> > process such as application equipment, spray nozzle, thickness, Drying,
> > coverage, etc.   Is there an associated IPC Standard that I can review?
> >   I would very much appreciate any information you can share.
> >
> > Victor,
> >
> > From: Hernandez, Victor G
> > Sent: Wednesday, June 18, 2014 8:03 AM
> > To: Stadem, Richard D.; TechNet E-Mail Forum
> > Cc: Hernandez, Victor G
> > Subject: RE: Conformal Coating, ACCL-53T
> >
> > Good response for SAFETY, but searching for something more
> > constructive with regards to the above stated product..
> >
> > Victor,
> >
> > -----Original Message-----
> > From: Stadem, Richard D. [mailto:[log in to unmask]]
> > Sent: Tuesday, June 17, 2014 3:47 PM
> > To: TechNet E-Mail Forum; Hernandez, Victor G
> > Subject: RE: Conformal Coating
> >
> > Yes, acceleration to 53 mph, tops, has always been a safe way to drive.
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
> > Sent: Tuesday, June 17, 2014 3:01 PM
> > To: [log in to unmask]<mailto:[log in to unmask]>
> > Subject: [TN] Conformal Coating
> >
> > Fellow TechNetters:
> >
> > Anyone out there has experience with ACCL-53T?
> >
> > Victor,
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask] <mailto:[log in to unmask]>
> > ______________________________________________________________________
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned.
>
> ______________________________________________________________________
> Aero Engine Controls is part of the Rolls-Royce Group. The legal entity of
> Aero Engine Controls is Rolls-Royce Controls and Data Services Limited
> which is registered in England.
> Registered office at Moor Lane, PO Box 31, Derby, DE24 8BJ. Company number
> 6686268, UK VAT number GB 939 396 075
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________