The XRF indicate Sn, Pb and Cu.
Thanks
-------- הודעה מקורית --------
מאת: "Wenger, George M. [Contractor]"
תאריך:02/06/2014 6:16 PM (GMT+02:00)
אל: TechNet E-Mail Forum ,Zilber Gil
נושא: RE: [TN] Capacitor - strange soldering behavior
What did the XRF indicate?
Regards,
George
George M. Wenger
Failure Signature & Characterization Lab LLC
609 Cokesbury Road, High Bridge, NJ 08829
(908) 638-8771 Home (732) 309-8964 Mobile
E-mail [log in to unmask]
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Zilber Gil
Sent: Monday, June 02, 2014 11:13 AM
To: [log in to unmask]
Subject: Re: [TN] Capacitor - strange soldering behavior
XRF was done on a new part before reflow. Before reflow the surface was shine. After reflow it was grayed and porous as seen in the picture.
Thanks,
Gil
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Monday, June 02, 2014 6:06 PM
To: [log in to unmask]
Subject: Re: [TN] Capacitor - strange soldering behavior
Would XRF plating alloy identification work here on a loose part?
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of David Hillman
Sent: Monday, June 02, 2014 9:36 AM
To: [log in to unmask]
Subject: Re: [TN] Capacitor - strange soldering behavior
Hi Gil - two questions: (1) Does the capacitor have a barrier layer of copper or nickel to prevent the underlying metallization from leaching into the solder joint?; (2) Have you completed a cross section to assess the solder joint microstructure?
Dave Hillman
Rockwell Collins
[log in to unmask]
On Thu, May 29, 2014 at 9:01 AM, Zilber Gil wrote:
> Hello Technet,
>
> While soldering this ceramic capacitor (
> http://ipc-technet.groupsite.com/gallery/27235), its looks like that
> the capacitor suck the solder from the PCB`s pad to the capacitor pad
> and the color is now grayish and porosity. XRF found Sn, Pb, Cu on the
> capacitor pad. PCB Solderability was good and the profile was SnPb at
> 225 deg C under Nitrogen. Other capacitors and components on the board
> look normal with shine soldering.
> Can anybody seen something like that before? Any ideas?
>
> Thanks and have a wonderful weekend.
>
> Dr. Gil Zilber
> Technologist, Elta system Ltd.
>
>
> The information contained in this communication is proprietary to
> Israel Aerospace Industries Ltd. and/or third parties, may contain
> confidential or privileged information, and is intended only for the
> use of the intended addresse thereof. If you are not the intended
> addressee, please be aware that any use, disclosure, distribution
> and/or copying of this communication is strictly prohibited. If you
> receive this communication in error, please notify the sender immediately and delete it from your computer.
>
> Thank you.
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
The information contained in this communication is proprietary to Israel Aerospace Industries Ltd. and/or third parties, may contain confidential or privileged information, and is intended only for the use of the intended addresse thereof. If you are not the intended addressee, please be aware that any use, disclosure, distribution and/or copying of this communication is strictly prohibited. If you receive this communication in error, please notify the sender immediately and delete it from your computer.
Thank you.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
The information contained in this communication is proprietary to Israel Aerospace Industries Ltd. and/or third parties, may contain confidential or privileged information, and is intended only for the use of the intended addresse thereof. If you are not the intended addressee, please be aware that any use, disclosure, distribution and/or copying of this communication is strictly prohibited. If you receive this communication in error, please notify the sender immediately and delete it from your computer.
Thank you.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
