Subject: | |
From: | |
Reply To: | |
Date: | Thu, 5 Jun 2014 10:55:21 -0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
To clarify - the proposed project is one we will build, we are not
involved in the design other than performing manufacturability reviews
on it. Our part is looking like assembly of the circuit board and
potentially potting the board into it's carrier. The client is well
versed in the design side of things.
regards,
Graham Collins
Senior Process Engineer
Sunsel Systems
(902) 444-7867 ext 211
On 6/5/2014 10:38 AM, Brian Ellis wrote:
> Absolutely, the only sensible approach!
>
> Beian
>
> On 05.06.2014 16:13, Steven Creswick wrote:
>> Graham,
>>
>> Back in the day, we would have approached as much as we could with
>> hybrid
>> technology.
>>
>> Eutectic die attach on ceramic [High temp co-fired ceramic, alumina
>> substrate within metal package, or Low Temp Co-fired ceramic], etc. Way
>> back, there was even eutectic attach for passives - if properly
>> metallized...
>>
>> Being in a hermetic package, no conformal coatings...
>>
>> Being a potentially highly corrosive environment the package is truly
>> put to
>> the test. Drawing upon implantable medical technologies [also a
>> corrosive
>> environment, believe it or not], there are multiple packaging options
>> available including stainless & titanium.
>>
>> Just a different persective...
>>
>> Steve Creswick
>> Sr Associate - Balanced Enterprise Solutions
>> http://www.linkedin.com/in/stevencreswick
>> 616 834 1883
>>
>>
>>
>>
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud
>> service.
>> For more information please contact helpdesk at x2960 or
>> [log in to unmask]
>> ______________________________________________________________________
>>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|