Victor, if you have a copy of IPC Review from August 2002, you can find an article I wrote about qualification of a conformal coating machine, although used with another material. I'll dig up a copy and send outside of TechNet. Louis Hart
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Friday, June 20, 2014 8:44 AM
To: [log in to unmask]
Subject: Re: [TN] Conformal Coating
Fellow TechNetters:
I have not received many responses to my conformal coating inquiry, ACCL-53T. Perhaps someone can share parameters associated with the process such as application equipment, spray nozzle, thickness, Drying, coverage, etc. Is there an associated IPC Standard that I can review?
I would very much appreciate any information you can share.
Victor,
From: Hernandez, Victor G
Sent: Wednesday, June 18, 2014 8:03 AM
To: Stadem, Richard D.; TechNet E-Mail Forum
Cc: Hernandez, Victor G
Subject: RE: Conformal Coating, ACCL-53T
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|