As Jim, says, in case you have to manage high RH% in your facility, if you
need to correctly handle, storage, package,use, etc, your:
- MSD (Moisture Sensitive Device), the IPC/J-STD-033C is the right standard
who gives you guidelines.
- PCB ( also them need to be protected against moisture absorption, mainly
if in lead free reflow environment) take in consideration the IPC-1601
For a correct protection against ESD, the Standard mainly followed are:
- USA : ANSI 20.20, others EIA, JEDEC,
- Europe : mainly IEC-EN-61340-5-1
Regards
Gabriele
-----Messaggio originale-----
Da: TechNet [mailto:[log in to unmask]] Per conto di McGrath, Jim
Inviato: giovedì 24 aprile 2014 08:10
A: [log in to unmask]
Oggetto: Re: [TN] Humidity levels within SMT/PCA factories.
Can I assume you are having problems with too much humidity causing damage
to components when subjected to reflow temps? I recall there is a joint
IPC/JEDEC (at least I think that's who published the document) covering
storage of components for SMT. Or it could be an EIA standard.
Jim McGrath
Strategic Marketing Manager
TE Consumer Devices
Cell: 630-244-3872
Email: [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Wednesday, April 23, 2014 3:16 PM
To: [log in to unmask]
Subject: Re: [TN] Humidity levels within SMT/PCA factories.
I think there is an ESD Association standard that covers it but most control
systems have a minimum value of 30%. When values fall below that,
additional ESD measures kick in. The most common being spray misters to
increase relative humidity.
Doug Pauls
From: Jim West <[log in to unmask]>
To: <[log in to unmask]>
Date: 04/23/2014 03:03 PM
Subject: [TN] Humidity levels within SMT/PCA factories.
Sent by: TechNet <[log in to unmask]>
Hi all,
Is there a standard written that covers required humidity levels within an
SMT/PCA plant?
What levels do others maintain in their factories where humidity is an
issue?
Thanks,
Jim
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---
Questa e-mail è priva di virus e malware perché è attiva la protezione avast! Antivirus.
http://www.avast.com
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|