Subject: | |
From: | |
Reply To: | |
Date: | Tue, 22 Apr 2014 13:12:23 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Roland-
It can vary a bunch, depending on how much metal is in the pcb and how that metal is arranged. Most designs for thermal transfer depend on thermal vias to do most of the work. You can get fast ballpark answers with "back of the envelope" thermal transfer coefficients for PCB laminate, or even better, grab a board that's similar and just measure the performance. If you need answers within a few degrees, then the thermal analysis can get considerably more complex.
Wayne Thayer
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roland Jaquet
Sent: Tuesday, April 22, 2014 4:06 AM
To: [log in to unmask]
Subject: [TN] Seeking : Thermal Resistance onto PCB surface
Dear Technetters,
I am confronted to an unusual challenge I am not able to solve. Can someone help, if you please
We are seeking : Thermal Resistance onto PCB surface (14 layers) standard approx.. 1.8 mm thick
Between
External Cu of approximately 30 to 35 metric microns covered with ENIG
And
Aluminum "Alodinized" 1200 or Anodized in black
Thank you for your help
Meilleures salutations
Best Regards
Roland
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|