DESIGNERCOUNCIL Archives

March 2014

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Larry Brophy <[log in to unmask]>
Reply To:
(Designers Council Forum)
Date:
Mon, 10 Mar 2014 14:26:17 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (16 lines)
Hi all, is there any table besides Table 6-1 in IPC-2221B that I can use for the layer seperation that takes into account the voltage resistance of FR4.  I know FR4 is good for 300V per mil and I need 500V isolation, if I use Table 6.1 I'm going to need  9.74mil between layers and have a very thick board.

I have a customer that wants the design to be Class 3 and insists that I use this table unless I can find something in an IPC spec that allows me to use the voltage resistance of FR4 instead of this table.

Many thanks,

Larry

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------

ATOM RSS1 RSS2