we have 2 Onsite generators feeding a large reservoir tank. This covers 
the requirements of 3 select solder machines (4 pots total). These 
generators are rated for 99.995%.

You get an extra 9   (99.9995%) if you supply from liquid bottles. You can 
see the difference, but the generators are pure enough for this process 
and work flawlessly with little support. We only bring in bottles if the 
generators are offline, and back when we were testing the difference in 
purity. We have not had a failure in a few years now. For our location the 
payback for generators was achieved very quickly.



Roger Mack  P.Eng. 
Manufacturing Specialist
Parker Hannifin Canada
Electronic Controls Division
1305 Clarence Avenue
Winnipeg, MB  R3T 1T4 Canada 
direct 204 453 3339 x7373
[log in to unmask]
www.parker.com/ecd







From:
Keith Calhoun <[log in to unmask]>
To:
<[log in to unmask]>
Date:
02-25-2014 06:36 AM
Subject:
[TN] Nitrogen question
Sent by:
TechNet <[log in to unmask]>



We are looking into installing a selective soldering machine in our 
facility.  The machine we are looking into wants a nitrogen supply to 
inert the solder pot.
My question to the forum is what source are you using for their nitrogen 
requirements?  Also what purity level are you using?
 
 
Keith S. Calhoun
Manufacturing Engineering Manager
Sopark Corporation
3300 South Park Avenue
Lackawanna, New York 14218
716-822-0434 Ext. 237
[log in to unmask]
 
SoPark Corporation 
Talent - Teamwork - Technology
Over 32 years as a Premier Electronics Manufacturing Service Provider 
ISO 9001:2008, ISO 13485:2003 & AS9100C Certified 
 

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________



"PLEASE NOTE: The preceding information may be confidential or
privileged. It only should be used or disseminated for the purpose
of conducting business with Parker. If you are not an intended
recipient, please notify the sender by replying to this message and
then delete the information from your system. Thank you for your
cooperation."


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________