Subject: | |
From: | |
Reply To: | |
Date: | Fri, 28 Feb 2014 08:15:07 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Raye,
We use GFI outlet boxes for powering AC powered products under test, we use a double gang box, one side is a on/off switch and the other is a GFI outlet. The GFI outlet will protect the tester / tech from accidently contacting a hot node and ground (through the bench / wrist strap, although wrist straps have built in resistance to limit current hazards). Unfortunately, they won't protect if someone touches both hot and neutral on the product being tested.
As others have noted, an isolation transformer will also prevent a current path to ground, but at a higher cost. Tiger Direct sells the Tripp Lite units, 250VA to 100VA, at a few hundered US $ each. You can buy isolation transformers and put the AC connectors on them for less, but it wont be as fancy looking.
Blair
On Thu, 27 Feb 2014 12:00:52 -0800, Rivera, Raye <[log in to unmask]> wrote:
>I have been tasked with ensuring that our functional test and troubleshooting workstations are set up safely. We are having some debate as to whether GFI protection is a good idea at these workstations. My question for the group is:
>
>Have you ever had a GFI cause problems at a workstation?
>
>I read a good thread on the technet archives about GFI at Hipot test, but I'm hoping for information at test stations in general.
>
>
>Best regards,
>Raye Rivera
>
>QA Manager * Canoga Perkins
>
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud service.
>For more information please contact helpdesk at x2960 or [log in to unmask]
>______________________________________________________________________
|
|
|