Mike,
Very well said - I also had difficulty with the variation of opinions and
reasons.
William A. Ortloff
Engineering Fellow
MOEC - MSPPD
Space and Airborne Systems
Raytheon Company
310.607.7333 office
310.616.1873 fax
310-765-0381 blackberry
[log in to unmask]
From: "Hill, Mike" <[log in to unmask]>
To: <[log in to unmask]>
Date: 12/11/2013 08:12 AM
Subject: Re: [IPC-600-6012] Crazing
Sent by: IPC-600-6012 <[log in to unmask]>
All,
I have been following this conversation for the last 7-8 days and it is
apparent that even the PWB experts are having trouble defining wicking,
crazing, glass fracturing and as such, the IPC-6012 committee needs to help
the industry fill this gap by providing a lot more information and figures
than we have ever anticipated.
Mike Hill
Quality Manager
Viasystems North America Inc.
www.viasystems.com
SOLUTIONS BEYOND LIMITS
1200 Severn Way; Sterling, Virginia 20166
Tel:703-652-2226 Mbl: 703-943-7091
[log in to unmask]
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Denise
Chevalier
Sent: Wednesday, December 11, 2013 10:07 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Sorry late to the party have been away from the office - the photos shown
are in dark field and may exaggerate/skews the view of the condition.
Think if we were to see in white light we may be more apt to see the true
wicking and less of the magnification of the glass strands which is
expected when viewed in dark field. Measurement of the wicking (copper
seepage between the glass) in comparison to the copper thickness along the
hole wall seems as it would meet the class 3 requirement. So basically I
do not see anything wrong with this hole. If CAF is a concern perhaps the
design needs to be reviewed to allow for more space between the hole and
feature.
Denise
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Paul Reid
Sent: Friday, December 06, 2013 12:41 PM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Hi Joey,
Thanks for the input. Your opinion is important.
The thing is that, according to the specification wicking is the movement
of liquid between the fibers. The specification then goes on the mention
copper depositing. So if I call this defect wicking and the wicking
extends to the end of the separation then this violates the wicking
specification. If the wicking stops were the copper ends then this meets
the specification.
I am sure that this is crazing.
Sincerely,
Paul Reid
Program Coordinator
PWB Interconnect Solutions Inc.
235 Stafford Rd., West, Unit 103
Nepean, Ontario Canada, K2H 9C1
613 596 4244 ext. 229
Skype paul_reid_pwb
[log in to unmask]
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Jose A Rios
Sent: December 6, 2013 11:53 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
.... and wicking ends where the plating along the fibers end....
Joey Rios
PWB & Process Quality Eng'r
i3 Electronics
1093 Clark St.
Endicott, NY 13760
Office: 607-755-5896; Cell: 607-206-3642
From: Bryan Clark <[log in to unmask]>
To: <[log in to unmask]>,
Date: 12/06/2013 11:19 AM
Subject: Re: [IPC-600-6012] Crazing
Sent by: IPC-600-6012 <[log in to unmask]>
Hi Paul
I hope all is well.
I would classify this defect as wicking and evaluate for acceptance as
such.
Wicking starts at the drill process and is made worse during chemical
processing.
I have attached the IPC 600 training materials for the wicking defects and
more examples. This is an unacceptable condition.
Regards
Bryan Clark
FTG: Director of Corporate Quality
Firan Technology Group Corporation
250 Finchdene Square
Toronto, ON Canada M1X 1A5
FTG Circuits : (416) 299 4000 x222
FTG Aerospace: (416) 438 6076 x 368
C: (416) 678 9419
[log in to unmask]
www.ftgcorp.com
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Jose A Rios
Sent: December-06-13 10:40 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
hi paul, in my opinion, what you have here is an artifact of drilling; not
a base material or lamination defect, which is how crazing is defined.
this artifact may only be visible in darkfield, normal lighting may not
reveal it.
this artifact is further enhanced if etchback is used. its a wicking path
that didnt plate up because its too deep.
wicking acceptance criteria is defined for the plated part, not the
invisible path that remains....
this would pass group a (lot conformance), but may not perform well if caf
tested.
Joey Rios
PWB & Process Quality Eng'r
i3 Electronics
1093 Clark St.
Endicott, NY 13760
Office: 607-755-5896; Cell: 607-206-3642
From: Paul Reid <[log in to unmask]>
To: <[log in to unmask]>,
Date: 12/06/2013 10:21 AM
Subject: Re: [IPC-600-6012] Crazing
Sent by: IPC-600-6012 <[log in to unmask]>
Hi Russ,
I'll try with this email. I think that IPC strips all attachments however.
Sincerely,
Paul Reid
Program Coordinator
PWB Interconnect Solutions Inc.
235 Stafford Rd., West, Unit 103
Nepean, Ontario Canada, K2H 9C1
613 596 4244 ext. 229
Skype paul_reid_pwb
[log in to unmask]
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Russ Shepherd
Sent: December 6, 2013 9:42 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Hi Paul,
Can you attach the photo to this email string?
Sincerely,
Russ Shepherd
Vice President of Operations
MICROTEK LABORATORIES
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Paul Reid
Sent: Friday, December 06, 2013 5:34 AM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Hi Russ,
Maybe you can help. How do I post pictures to the IPC site?
Sincerely,
Paul Reid
Program Coordinator
PWB Interconnect Solutions Inc.
235 Stafford Rd., West, Unit 103
Nepean, Ontario Canada, K2H 9C1
613 596 4244 ext. 229
Skype paul_reid_pwb
[log in to unmask]
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Russ Shepherd
Sent: December 5, 2013 4:27 PM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Crazing is an externally observable characteristic. If you see crazing in
a microsection it would fall under laminate defects, such as delamination,
laminate voids or cracks.
If you have a photo of the condition it might make it easier to comment on.
Sincerely,
Russ Shepherd
Vice President of Operations
MICROTEK LABORATORIES
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Whittaker,
Dewey (EHCOE)
Sent: Thursday, December 05, 2013 1:13 PM
To: [log in to unmask]
Subject: Re: [IPC-600-6012] Crazing
Was the observation as received or after thermal stress?
Dewey
-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Paul Reid
Sent: Thursday, December 05, 2013 2:06 PM
To: [log in to unmask]
Subject: [IPC-600-6012] Crazing
I was just on a conference call where we found crazing (a separation
between glass fibers and the epoxy system), in a microsection. The
fabricator stated that this had to be evaluated looking at a board
macroscopically and could not be evaluated microscopically.
Crazing is called out in IPC-A- 600 in section 2, paragraph 2.3.2 page 18,
which is "Externally Observable Characteristics". In A-600 there is picture
of a microsection showing the defect but it states that a microsection is
not required.
In IPC 6012-2010 crazing is call out in 3.3.2.2, page 12, which states (I
am paraphrasing), "Crazing shall not violate greater than 50% of the
distance between adjacent conductors..." The document then refers to IPC A
600.
What is your take on their argument that crazing should not be evaluated
microscopically as per IPC?
Sincerely,
Paul Reid
Program Coordinator
PWB Interconnect Solutions Inc.
235 Stafford Rd., West, Unit 103
Nepean, Ontario Canada, K2H 9C1
613 596 4244 ext. 229
Skype paul_reid_pwb
[log in to unmask]
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________[a
ttachment
"6494_M_003.jpg" deleted by Jose A Rios/Endicott/EIT] [attachment
"6494_2_1 mod.jpg" deleted by Jose A Rios/Endicott/EIT] [attachment
"6494_M_002.jpg" deleted by Jose A Rios/Endicott/EIT]
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
The information contained in this communication and its attachment(s) is
intended only for the use of the individual to whom it is addressed and may
contain information that is privileged, confidential, or exempt from
disclosure. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, distribution, or copying of
this communication is strictly prohibited. If you have received this
communication in error, please notify [log in to unmask] and delete
the communication without retaining any copies. Thank you.
Translations of this available:
Traduction disponible chez:
Traducciones disponibles en:
Vertalingen beschikbaar bij:
http://www.viasystems.com/dynamic_page.asp
____________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
