Milling machine?
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0965
Cl: 949-581-6601
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso - Diamond-MT.com
Sent: Wednesday, November 20, 2013 11:52 AM
To: [log in to unmask]
Subject: Re: [TN] Removing epoxy adhesive 2216
Ouch, that's going to hurt.
Try Techspray 2510P to soften it up. Also, a Dremel tool with a small engraving bit. Use caution as the Techspray is tetrahydrofuran, nasty stuff.
Lloyd Duso
Diamond-MT
Plant Manager
(814) 535-3505
www.Diamond-mt.com
On Wed, Nov 20, 2013 at 11:55 AM, Watson, Howard A <[log in to unmask]> wrote:
> Hi all,
>
> We have to salvage 2 15-pin Micro-D connectors from a flex board, to
> use on a new board. The de-soldering can be achieved, but they are
> also bonded with 3M(tm) Scotch-Weld(tm) Epoxy Adhesive 2216, and this
> is pretty strong stuff. Our tech is very skilled, but has concerns
> about damaging the connector (Glenair GMR7580C-15S2EB-429F), as this is for space application.
> These are long lead parts, so doing this is undesirable, but a last resort.
> Do any of you have suggestions for removing this adhesive? Thanks in
> advance for you help!
>
> Howard A. Watson
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
