Subject: | |
From: | |
Reply To: | |
Date: | Wed, 20 Nov 2013 15:11:45 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Howard,
You might take a look at Dynaloy. They make chemicals for deprocessing semiconductor packages including cured epoxies.
http://www.dynaloy.com/dynaloy-chemical-solutions-products/specialty-chemistries/epoxy-products/cured-epoxies.html
Bruce Tostevin
Benchmark Electronics
Nashua, New Hampshire
On Wed, Nov 20, 2013 at 11:55 AM, Watson, Howard A <[log in to unmask]> wrote:
> Hi all,
>
> We have to salvage 2 15-pin Micro-D connectors from a flex board, to
> use on a new board. The de-soldering can be achieved, but they are
> also bonded with 3M(tm) Scotch-Weld(tm) Epoxy Adhesive 2216, and this
> is pretty strong stuff. Our tech is very skilled, but has concerns
> about damaging the connector (Glenair GMR7580C-15S2EB-429F), as this is for space application.
> These are long lead parts, so doing this is undesirable, but a last resort.
> Do any of you have suggestions for removing this adhesive? Thanks in
> advance for you help!
>
> Howard A. Watson
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|