TECHNET Archives

November 2013

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Wayne Thayer <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Wayne Thayer <[log in to unmask]>
Date:
Wed, 20 Nov 2013 20:00:31 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (55 lines)
Usually liberal use of portable hot air jets softens the adhesive enough to separate a joint.  

Wayne

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of lduso - Diamond-MT.com
Sent: Wednesday, November 20, 2013 2:52 PM
To: [log in to unmask]
Subject: Re: [TN] Removing epoxy adhesive 2216

Ouch, that's going to hurt.

Try Techspray 2510P to soften it up. Also, a Dremel tool with a small engraving bit. Use caution as the Techspray is tetrahydrofuran, nasty stuff.

Lloyd Duso
Diamond-MT
Plant Manager
(814) 535-3505
www.Diamond-mt.com


On Wed, Nov 20, 2013 at 11:55 AM, Watson, Howard A <[log in to unmask]> wrote:

> Hi all,
>
> We have to salvage 2 15-pin Micro-D connectors from a flex board, to 
> use on a new board. The de-soldering can be achieved, but they are 
> also bonded with 3M(tm) Scotch-Weld(tm) Epoxy Adhesive 2216, and this 
> is pretty strong stuff. Our tech is very skilled, but has concerns 
> about damaging the connector (Glenair GMR7580C-15S2EB-429F), as this is for space application.
> These are long lead parts, so doing this is undesirable, but a last resort.
> Do any of you have suggestions for removing this adhesive? Thanks in 
> advance for you help!
>
> Howard A. Watson
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or 
> [log in to unmask] 
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2