Sender: |
|
X-To: |
|
Date: |
Fri, 22 Nov 2013 16:18:10 +0000 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
MIME-Version: |
1.0 |
In-Reply-To: |
|
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
Parts/Attachments: |
|
|
As once noted from a quartet of famous resources "Let it B".
Dewey
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Theodore J Tontis
Sent: Friday, November 22, 2013 9:11 AM
To: [log in to unmask]
Subject: [TN] PCB stack up question
I have a 6 layer stack up specified on my gerbers as:
0.0004 mil solder mask
0.0014 mil top layer 1oz copper
0.0086 mil 2 X 2116 prepreg
0.0014 mil inner 1 1oz copper
0.0140 mil core
0.0014 mil inner 2 1oz copper
0.0086 mil 2 X 2116 prepreg
0.0014 mil inner 3 1oz copper
0.0140 mil core
0.0014 mil inner 4 1oz copper
0.0086 mil 2 X 2116 prepreg
0.0014 mil bottom layer 1oz copper
0.0004 mil solder mask
0.0620 mil total stack up +/- 0.006
Our CM's vendor is requesting I change either
A: adjust the 14mil core to 12mil to meet 62±6mil finished thickness.
B: relax the finished thickness to 65±6mil..
C: control the board thickness with 62±6mil exclude the solder mask thickness.
Their stack up is as follows:
0.0005 mil solder mask
0.0020 mil top layer 1oz copper
0.0091 mil 2 X 2116 prepreg
0.0012 mil inner 1 1oz copper
0.0142 mil core
0.0012 mil inner 2 1oz copper
0.0085 mil 2 X 2116 prepreg
0.0012 mil inner 3 1oz copper
0.0142 mil core
0.0012 mil inner 4 1oz copper
0.0091 mil 2 X 2116 prepreg
0.0020 mil bottom layer 1oz copper
0.0005 mil solder mask
0.0649 mil total stack up +/- 0.006
I got my stack up from a local vendor I've worked with in the past.
Our CM has measured some of their bare boards at 0.070 and 0.071 mil thick.
Which stack up is correct or am I missing something important?
Ted T.
Theodore J. Tontis CID
Senior Manufacturing Engineer
[cid:[log in to unmask]]<http://www.eaton.com/>
11131 Adams Road
Franksville, WI 53126
Office 262-835-1552
Cell 262-510-3145
Fax 262-835-1544
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|