TECHNET Archives

September 2013

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stadem, Richard D." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Stadem, Richard D.
Date:
Wed, 11 Sep 2013 15:43:16 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (44 lines)
If the metal stiffener is solderable, punch some metal slugs that will fill the holes and solder them in place. The solder will fill any gaps and should be quite flat.
If the metal stiffener is not solderable, it may be cheaper to throw them away and replace with stiffeners with no holes.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Wayne Thayer
Sent: Wednesday, September 11, 2013 10:33 AM
To: [log in to unmask]
Subject: Re: [TN] Metal stiffeners

Of course JB Weld is available everywhere and will work, but the color is ugly and it doesn't machine pleasantly (being full of iron particles, calcium, and other stuff).

But, there are "Liquid Metal" repair kits for cleaning up molds, etc., and those look a lot prettier but are a lot pricier!

Wayne

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Kelly
Sent: Wednesday, September 11, 2013 10:05 AM
To: [log in to unmask]
Subject: [TN] Metal stiffeners

Good Morning All.
I am looking for a way to fill up some holes in a metal stiffener such that a) the surface will be very flush b) I can still go through a press cycle to bond the stiffeners onto the flex.
Thanks. Steve Kelly


If the recipient to whom this e-mail is sent has an NDA with PFC Flexible Circuits Limited this e-mail is considered confidential and is subject to any NDA agreements between the respective parties.

See PFC on "How It's Made`` coming soon on the Discovery Channel!


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2