Ernesto,
Have you considered bringing SCS people in to renovate or refurbish the 
machine.  Quite often, automated coating machines may not get the 
preventative maintenance they need.  I know PVA techs can come in and do a 
tune up on their machines.  Perhaps SCS will do the same.

Doug Pauls



From:   "Rueda, Ernesto" <[log in to unmask]>
To:     <[log in to unmask]>
Date:   09/06/2013 09:40 AM
Subject:        [TN] Conformal Coating Machine
Sent by:        TechNet <[log in to unmask]>



Hi all,

I am seeking feedback from the experts about conformal coating machine.

We need to buy a new conformal coating machine. The old machine (Specialty 
Coating System Model SCS-4398) from our other facility has been 
transferred to our plant. However, it is not really working good. We are 
using Dymax 987 Conformal Coating material.

I would like feedback from the Forum as to which vendors you might 
recommend.

Thank you in advance.

Ernesto


Ernesto V. Rueda   |   PELCO by Schneider Electric   |   SMT Process 
Engineer
Phone: +1 559-292-1981 ext. 3848  |   Fax: +1 559-388-3781  |   Mobile: +1 
559-333-3913
Email: [log in to unmask]    |   Site: www.pelco.com   | 
  Address: 3500 Pelco Way, Clovis, CA  93612-5699 USA
ƒÀ please consider the environment before printing this email

 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________




______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________