Doug

I agree with the PVA comment. I was just up to their plant last month.
Great place and good people. Unfortunately, they stopped making the
benchtop products. It used to be their 200 series. (I know because I asked
for one when I was there.) Their software does look like a good user
friendly style though.

Lloyd Duso
Diamond-MT
Plant Manager
(814) 535-3505
www.Diamond-mt.com


On Fri, Sep 6, 2013 at 8:19 AM, Douglas Pauls
<[log in to unmask]>wrote:

> Both Nordson EFD and PVA (Precision Valve and Automation) make good
> benchtop dispense units.  Those are the two I would start with.
>
> I have more experience with the PVAs and have found PVA to be a good
> company to work with.  I really like their Pathmaster software for
> programming and editing.
>
> Doug Pauls
>
>
>
> From:   "Stadem, Richard D." <[log in to unmask]>
> To:     "[log in to unmask]" <[log in to unmask]>,
> "TechNet E-Mail Forum" <[log in to unmask]>
> Date:   09/06/2013 06:02 AM
> Subject:        RE: [TN] Benchtop dispensers
>
>
>
> Zymet TC201 thermally conductive epoxy and Loctite 3621.
>
> From: [log in to unmask] [mailto:[log in to unmask]]
> Sent: Thursday, September 05, 2013 3:27 PM
> To: TechNet E-Mail Forum; Stadem, Richard D.
> Subject: Re: [TN] Benchtop dispensers
>
> What do you want to dispense?
>
> Doug Pauls
>
>
>
> From:        "Stadem, Richard D." <[log in to unmask]>
> To:        <[log in to unmask]>
> Date:        09/05/2013 03:20 PM
> Subject:        [TN] Benchtop dispensers
> Sent by:        TechNet <[log in to unmask]>
>
>
>
>
> I am seeking feedback from Those Who Know (you folks).
> I need to purchase a benchtop dispensing robot. I am looking at something
> like a Fisnar model F2304N-1 which is a 4-axis model, X, Y, Z, and R.
> I am looking at Fisnar, EFD, Fishman, and other similar manufacturers.
> I would like feedback from the Forum as to which vendors you might
> recommend, bad experiences, what to look for, etc.
> You are always free to contact me on the Forum or offline. I will even
> take you out and buy you a few beers if you're not too far away!
> Thanks for any feedback
> dean
>
> This message and/or attachments may include information subject to GDC4S
> S.P. 1.8.6 and GD Corporate Policy 07-105 and are intended to be accessed
> only by authorized recipients. Use, storage and transmission are governed
> by General Dynamics and its policies. Contractual restrictions apply to
> third parties. Recipients should refer to the policies or contract to
> determine proper handling. Unauthorized review, use, disclosure or
> distribution is prohibited. If you are not an intended recipient, please
> contact the sender and destroy all copies of the original message.
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________