Both Nordson EFD and PVA (Precision Valve and Automation) make good 
benchtop dispense units.  Those are the two I would start with.

I have more experience with the PVAs and have found PVA to be a good 
company to work with.  I really like their Pathmaster software for 
programming and editing. 

Doug Pauls



From:   "Stadem, Richard D." <[log in to unmask]>
To:     "[log in to unmask]" <[log in to unmask]>, 
"TechNet E-Mail Forum" <[log in to unmask]>
Date:   09/06/2013 06:02 AM
Subject:        RE: [TN] Benchtop dispensers



Zymet TC201 thermally conductive epoxy and Loctite 3621.
 
From: [log in to unmask] [mailto:[log in to unmask]] 
Sent: Thursday, September 05, 2013 3:27 PM
To: TechNet E-Mail Forum; Stadem, Richard D.
Subject: Re: [TN] Benchtop dispensers
 
What do you want to dispense? 

Doug Pauls 



From:        "Stadem, Richard D." <[log in to unmask]> 
To:        <[log in to unmask]> 
Date:        09/05/2013 03:20 PM 
Subject:        [TN] Benchtop dispensers 
Sent by:        TechNet <[log in to unmask]> 




I am seeking feedback from Those Who Know (you folks).
I need to purchase a benchtop dispensing robot. I am looking at something 
like a Fisnar model F2304N-1 which is a 4-axis model, X, Y, Z, and R.
I am looking at Fisnar, EFD, Fishman, and other similar manufacturers.
I would like feedback from the Forum as to which vendors you might 
recommend, bad experiences, what to look for, etc.
You are always free to contact me on the Forum or offline. I will even 
take you out and buy you a few beers if you're not too far away!
Thanks for any feedback
dean

This message and/or attachments may include information subject to GDC4S 
S.P. 1.8.6 and GD Corporate Policy 07-105 and are intended to be accessed 
only by authorized recipients. Use, storage and transmission are governed 
by General Dynamics and its policies. Contractual restrictions apply to 
third parties. Recipients should refer to the policies or contract to 
determine proper handling. Unauthorized review, use, disclosure or 
distribution is prohibited. If you are not an intended recipient, please 
contact the sender and destroy all copies of the original message.




______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________




______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________