TECHNET Archives

September 2013

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ed Popielarski <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Ed Popielarski <[log in to unmask]>
Date:
Mon, 23 Sep 2013 16:01:27 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (77 lines)
Steve,

You could probably modify these http://www.mcmaster.com/#90910a714/=omte40 by making a block with 4-40 D&T holes on a matrix (20X20?) and fly cut it in one pass. With 2 blocks and an electric screw gun you could probably do a few hundred per hour. 

If you need "lots", I know a guy with a CNC screw machine that could make custom screws reasonably.

Ed Popielarski
Engineering Manager


                               970 NE 21st Ct.
                              Oak Harbor, Wa. 98277

                              Ph: 360-675-1322
                              Fx: 206-624-0965
                              Cl: 949-581-6601

https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.011188,0.033023&ctz=420&t=m&z=16&iwloc=A


-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Monday, September 23, 2013 8:45 AM
To: [log in to unmask]
Subject: Re: [TN] Does anybody know where I can get a 5/16" long 4-40 wafer head machine screw?

Hi Richard!

Thanks! But do you have a link to the vendor where that has the ones that have a head height of only .030" ? All the ones I'm finding have a head height of at .059" which is too tall...

Steve 

-----Original Message-----
From: Stadem, Richard D. [mailto:[log in to unmask]]
Sent: Monday, September 23, 2013 9:34 AM
To: TechNet E-Mail Forum; Steve Gregory
Subject: RE: [TN] Does anybody know where I can get a 5/16" long 4-40 wafer head machine screw?

You can use a 5/16" 4-40 cap head screw. Same length but the head is only .030" thick. I have attached a picture. It won't show up on the posting, Steve, but you should get it directly.
dean

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Monday, September 23, 2013 10:19 AM
To: [log in to unmask]
Subject: [TN] Does anybody know where I can get a 5/16" long 4-40 wafer head machine screw?

Morning all,

 

Looking to find a 5/16" long 4-40 thread wafer head machine screw. It's to fasten down a TO-247 Power Transistor...don't have any clearance for the screw head. That's why I'm looking for a thin head. I only have about .053" clearance for the head of the screw.

 

Any help would be appreciated...

 

Steve 

 


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2