Gold too thin or not hard gold to start with - not proper Co or Ni hardening. Just A guess.
From: Victor Hernandez
Sent: Wednesday, August 7, 2013 7:12 AM
To: [log in to unmask]
Reply To: TechNet E-Mail Forum
Subject: Re: [TN] DIMM reseat issue
DIMM reseat failures occur often for many reasons which are not clearly understood. Deep dive analysis is required to isolate the issue which require pristine samples. Socket contact plating and DIMM finger contact plating, type of environment, flux residues, contaminants, etc,...
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge Hernefjord
Sent: Wednesday, August 07, 2013 4:21 AM
To: [log in to unmask]
Subject: Re: [TN] DIMM reseat issue
Lyon,
I think you mean resetting, not reseating. Numerous reasons. You may get help from the trouble shooting diagram:
http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/guide/TS_Server.html
Inge
On 25 July 2013 13:26, Lyon Yuan <[log in to unmask]> wrote:
> Hi Guys,
>
> What are all the probable causes of DIMM reseating issue? I mean that
> the blade server test pass under reseating DIMM
>
> Lyon Yuan
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
