Ioan,
Yes, George's book on wirebonding is often referred to as a bible for that
process. I believe I have 3 editions, two even signed by the yoda himself!!
Your question spans a great deal of ground. Are you speaking of thick film,
thin film, laminate, hermetic, non-hermetic, chip and wire, flip chip, TAB,
beam lead .... and the list goes on and on.
Inge is another old hybrid man that may have some good references, but I
would start out with the old ISHM - International Society for Hybrid
Microelectronics proceedings themselves.
Then ISHM morphed into IMAPS - International Microelectronics Assembly and
Packaging Society. If you go to the IMAPS site, you will no doubt find
decent materials on the particular subjects you are looking for.
http://www.imaps.org/
Depending on what you were into, many companies created their own 'bibles'
in the form of design guidelines - such as AVX did with application notes on
ceramic caps, etc. We used to have significant design guidelines on all the
LTCC work we did for Mil, Space, Implantable and Telecom
The other thing you can do is befriend an 'old' hybrid coot
Steve Creswick
Sr Associate - Balanced Enterprise Solutions
http://www.linkedin.com/in/stevencreswick
616 834 1883
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ioan Tempea
Sent: Friday, August 16, 2013 7:42 AM
To: [log in to unmask]
Subject: [TN] Hybrid circuits bible
Dear Technos,
Is there any textbook on hybrid circuits?
Thanks,
Ioan Tempea, ing.
Ingénieur de fabrication / Manufacturing Engineer
[cid:[log in to unmask]]
514-457-2150 #3556
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
