Forgot the URL:

http://www.alexwhittemore.com/soldering-the-thinnest-wires-ever-conceived-headphone-modding/
Inge

On 6 August 2013 20:03, Stadem, Richard D. <[log in to unmask]>wrote:

> We do the same. We use magnet wire.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge Hernefjord
> Sent: Tuesday, August 06, 2013 12:56 PM
> To: [log in to unmask]
> Subject: Re: [TN] adhesive coated wire for rework
>
> Bruce,
> first a uniqum. I've practised. This is a VERY challenging repair method.
> Not for people without patience and sharp eyes.
> Second, we used a mod wire which had a insulation that was melted and left
> a tinned and solderable wire. Used for military equipments. Can call my
> friends for details if you are interested.
>
> Inge
>
>
> On 6 August 2013 18:32, Nowland, Russell Howard (Russell) <
> [log in to unmask]> wrote:
>
> > Bruce,
> >
> >
> > Here is what we use.
> >
> > http://www.preleg.com/
> >
> >
> >
> > RUSSELL NOWLAND
> > ALCATEL-LUCENT
> > REPAIR STRATEGY & SUPPLIER MANAGEMENT
> > 14000 Quail Spring Parkway, Suite 100
> > Oklahoma City, OK 73134
> > T: +1 405 302 1660
> > F: +1 405 302 1622
> > M: +1 405 203 0034
> > [log in to unmask]
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of <Bruce Tostevin>
> > Sent: Tuesday, August 06, 2013 10:47 AM
> > To: [log in to unmask]
> > Subject: [TN] adhesive coated wire for rework
> >
> > Many years ago at another company for rework and ECOs we used adhesive
> > coated wire which was bonded to the card by running a special iron
> > with a notched tip along its length. It was a neat, clean, easily
> > reworkable alternative to Tak Pak. Recently I ran into an application
> > where this might have worked nicely, but in asking around I couldn't
> > find anyone who's using this technology. I know the wire was of course
> > more expensive and another comment was that it was large and maybe
> > more difficult to find in smaller gauges. Is anyone using adhesive
> > coated insulated wire and what are / were your experiences with it? Is
> it suitable for high-rel applications?
> >
> > Bruce Tostevin
> > Benchmark Electronics
> > Nashua, New Hampshire
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
> > ______________________________________________________________________
> > This email has been scanned by the Symantec Email Security.cloud service.
> > For more information please contact helpdesk at x2960 or
> > [log in to unmask]
> > ______________________________________________________________________
> >
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
>


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________