Also check with University of Maryland at College Park since they are just down the road from you. I'm pretty sure they have one of these machines.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Carroll, Thomas A
Sent: Wednesday, June 19, 2013 9:47 AM
To: [log in to unmask]
Subject: Re: [TN] Non-destructive delamination inspection?
Rigo,
Google SonoLabs, a division of Sonoscan. They might be able to help you. Or at least they will let you know if what you're looking to do can be done.
Thomas A. Carroll, CQA, CIT, FAA ODA Unit Member Supplier Quality Engineer Boeing Defense, Space and Security - East Region Supplier Quality
eFAX: 314-777-1845
Cell: 215-692-2463
Virtual Desk Phone Number: 314-545-2358
email: [log in to unmask]
P Go Green! Please do not print this e-mail unless necessary.
NOTE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this e-mail in error, and delete the copy you received. Thank you.
EXPORT COMPLIANCE STATEMENT:
"The information contained herein is or may be controlled by the International Traffic in Arms Regulations (ITAR), 22 CFR 120-130, and may not be exported, or disclosed to a foreign person, whether in the United States or abroad, without prior U.S. Government written approval"
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Garcia, Rigo (GSFC-300.0)[ARES CORP]
Sent: Wednesday, June 19, 2013 9:39 AM
To: [log in to unmask]
Subject: Re: [TN] Non-destructive delamination inspection?
I apologize for not being specific.
I am trying to inspect a board that has already been populated with components and soldered. The delamination I am trying to detect is on the PCB.
Rigo
Principal Flight Hardware Technology Assurance Engineer NASA, Goddard Space Flight Center Workmanship Standards, Code 300 Phone. (301) 286-6129
Fax. (301) 286-6576
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Garcia, Rigo (GSFC-300.0)[ARES CORP]
Sent: Wednesday, June 19, 2013 9:24 AM
To: [log in to unmask]
Subject: [TN] Non-destructive delamination inspection?
Hi everybody,
Does anybody know if there is a non-destructive delamination inspection method around? Other than plain visual inspection I mean.
Best regards,
Rigo Garcia
Principal Flight Hardware Technology Assurance Engineer NASA, Goddard Space Flight Center Workmanship Standards, Code 300 Phone. (301) 286-6129
Fax. (301) 286-6576
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
