Inge,
A long time ago I read a paper on MIL-STD suggesting its a dodo bird. The author, a USAF statistician called the
Arrhenius Equation (1889) to be an erroneous equation when attempting to apply it to modern complex dense silicon integrated circuits.
i have the paper somewhere; I'll find it and share it here.
Cosmic rays, alpha particles, and many other factors now must be included in what has become a very uncertain calculation of MTTF.
Bob
Sent from my iPhone
On May 27, 2013, at 5:22 PM, Inge Hernefjord <[log in to unmask]> wrote:
> Paul,
>
> True. Sinnadurai made such calculations 30 years ago. His
> 'Step-Stress-Testing' was á la mode and we at Ericsson were sent to his
> courses. I remember his standard phrase first minutes : "Learn history and
> you can predict the future". It resulted in a massive failure data
> registering, which was used as a base for our life expectancy predictions.
> Imagine what a job long before computer programs like Nastran, LabView and
> lots more. The guys who managed advanced statistics were gods at that
> time.
>
> The choice of words and definitions and language translations cause
> confusions, but in general we mean same things. Wear out is wear out,
> fatigue is fatigue, Mean time between failures are same, as well as other
> topics like quality conformance, robustness against X and like. As like for
> clothes, there are minor swings how to do.
>
> Thanks for your words, despite wrinkles and bad legs, I try to be updated.
>
> Finally, a prediction question: how long will MIL-STD live?
>
> Inge
>
>
> On 27 May 2013 18:00, Paul Reid <[log in to unmask]> wrote:
>
>> Hi Inge,
>>
>> Since Wayne, mentioned IST testing (thank you Wayne) I thought that I
>> would add some thoughts on using the IST method to predict field life.
>>
>> Jason Furlong (PWB Interconnect Solution) and Michael Freda (Sun, now
>> Oracle) wrote a couple of papers (Advanced testing using real life
>> evaluation and statistical data analysis, and, Application of
>> Reliability/Survivability to Analysis Interconnect Stress Test Data to Make
>> Life Predictions on Complex, Lead-free Printed Circuit Board Assemblies) on
>> estimating the Field Life of PWBs by using IST testing at three different
>> temperatures below the Tg of the material. What they did was to measure IST
>> coupons cycles to failure, on coupons that had a wear out type of failure
>> when tested at 130°C 150°C and 170°C. Base on this data they were able to
>> produce a failure curve that allowed them to estimate the failure rate at
>> the end use environment (for example 65°C once a day).
>>
>> Subsequent testing demonstrated that this is an accurate method.
>>
>> What you need to do this type of testing is IST coupons on the production
>> panel. This is a effective method that give you great insight into the
>> general robustness of the product and possible field life of the PWB.
>>
>> Sincerely,
>>
>> Paul Reid
>>
>> Program Coordinator
>>
>> PWB Interconnect Solutions Inc.
>> 235 Stafford Rd., West, Unit 103
>> Nepean, Ontario Canada, K2H 9C1
>>
>> 613 596 4244 ext. 229
>>
>> Skype paul_reid_pwb
>> [log in to unmask]
>>
>>
>>
>> -----Original Message-----
>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Wayne Thayer
>> Sent: May 27, 2013 10:20 AM
>> To: [log in to unmask]
>> Subject: Re: [TN] Difference berween solder float and solder dip
>>
>> Most others who respond to this group are much more versed in IPC
>> standards than I am. I do know that when testing out layups it is common
>> to implement an IPC solder float test where a sample is alternately floated
>> on molten solder and then pulled off and allowed to cool for a certain
>> number of cycles, like 3x to 5x. A nice thing about this test with through
>> holes is that the solder usually wicks into the holes and supports the via
>> barrel during cross sectioning. This is a stressful test, but doesn't
>> resemble most usage conditions at all. Running the sample through the
>> reflow process multiple times is much more similar to actual use. 5x
>> reflow suggests a unit can take initial soldering plus a couple of rework
>> cycles.
>>
>> IST is also a great technique for looking at board structure robustness,
>> but it is expensive to get done and can only be done on a specially
>> designed sample.
>>
>> While boards which do better on these tests are likely to last longer in
>> the field, there is no simple or direct relationship from results to field
>> life. To validate field life is another science.
>>
>> Solder wettabiity by dip testing is something the board assembler cares
>> about, not the reliability guys.
>>
>> Wayne
>> ________________________________
>> From: SARAVANAN R [[log in to unmask]]
>> Sent: Monday, May 27, 2013 8:22 AM
>> To: TechNet E-Mail Forum; Wayne Thayer
>> Subject: Re: [TN] Difference berween solder float and solder dip
>>
>> Dear Mr Wayne Thayer,
>>
>> Some hi reliability agencies asking for solder dip to test the robustness
>> of the PTH and laminate integrity.
>> But all the standards talk about solder float & reflow simulation.
>>
>> I am interested in knowing which is the robust test ?. What are the
>> difference in stress that the specimen is undergoing the two tests?.
>> regards,
>>
>> R.Saravanan
>>
>>
>> ________________________________
>> From: Wayne Thayer <[log in to unmask]>
>> To: [log in to unmask]
>> Sent: Sunday, 26 May 2013 11:27 PM
>> Subject: Re: [TN] Difference berween solder float and solder dip
>>
>> Hi Inge-
>>
>> I'm confused! Is it possible you messed up 1&2? Testing wettability on
>> components makes sense to me.
>>
>> I thought float was for seeing how robust the circuit board construction
>> is, although the "popcorn" test was done on components years ago before
>> people knew how dry components needed to be kept.
>>
>> Wayne
>> ________________________________________
>> From: TechNet [[log in to unmask]<mailto:[log in to unmask]>] on behalf of Inge
>> Hernefjord [[log in to unmask]<mailto:[log in to unmask]>]
>> Sent: Sunday, May 26, 2013 7:26 AM
>> To: [log in to unmask]<mailto:[log in to unmask]>
>> Subject: Re: [TN] Difference berween solder float and solder dip
>>
>> Hi Ramakrishnan,
>>
>> 1. Solder dip test tells about the WETTABILITY.
>>
>> 2. Floating test tells about the ALIGNMENT
>>
>> Typically 1. is performed on just a few coupons and NO components, while 2.
>> is done with many coupons (or PCBs) and WITH components. For getting good
>> statistics it's not unusual with 10,000 components.
>>
>> Inge
>>
>>
>> On 25 May 2013 14:02, Ramakrishnan Saravanan <[log in to unmask]<mailto:
>> [log in to unmask]>> wrote:
>>
>>> What is the difference between solder dip test and solder float test of
>>> PWB test coupon. What is the difference in stress levels ?
>>>
>>> regards,
>>>
>>> R.Saravanan
>>>
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud service.
>> For more information please contact helpdesk at x2960 or [log in to unmask]
>> <mailto:[log in to unmask]>
>> ______________________________________________________________________
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud service.
>> For more information please contact helpdesk at x2960 or [log in to unmask]
>> <mailto:[log in to unmask]>
>> ______________________________________________________________________
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud service.
>> For more information please contact helpdesk at x2960 or [log in to unmask]
>> ______________________________________________________________________
>>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|