Subject: | |
From: | |
Reply To: | |
Date: | Tue, 21 May 2013 10:49:56 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Steve,
You might want to give Mike Bixenman or Dave Lober at Kyzen a call. Foam
in the wash tank is often related to the temperature of the bath, and
there is a "foam zone" between too hot and too cold where foam is easily
generated. Going a little hotter in the wash temp may eliminate much of
the foaming.
Doug Pauls
From: Steve Gregory <[log in to unmask]>
To: <[log in to unmask]>
Date: 05/21/2013 10:06 AM
Subject: [TN] Another Closed-loop cleaner question...
Sent by: TechNet <[log in to unmask]>
Morning all,
I may have already asked this once, and I think I know the answer, but
I'll ask anyway.
It's not a good idea to use defoamers in a closed-loop cleaner, right?
If we're getting too much foam in the wash tank, we should add another
carbon bed, correct?
Thanks to any who reply,
Steve Gregory
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|