Why gosh Doug, I don't know what to say! I can only say thank-you, and that
I'm humbled by your offer. But let me be clear, I'm not fishing for any
hand-outs, I never have. I've always done this because it's been my small
way of trying to pay back this wonderful list for everything that I have
gained from all of you, it's given me a great deal of satisfaction being
able to help my fellow technetter's in my own small way. I was upset with
Homestead for the increasing fee's that they were charging for the small
bandwidth that my page consumes, and the fact that I was having real trouble
backing-up everything from my page onto my own computer. The phone call with
them this morning resolved those issues.
My address is changing once again. You might remember when I first started
out on TechNet many years ago I was out in "silly-con valley" California,
then I moved to Tulsa, OK, then again to Allentown, PA, then once again to
Tallahassee, FL, and now I'm about to relocate one more time to Boise, ID
towards the end of this month. I will be the first to admit that I'm
absolutely sick of moving. I will also admit that this move now really has
my attention and I hope that things go well for me. It's going to be over
2,400-miles in a Uhaul towing my car, and probably at least a week of
driving. What I'm really worried about is going across the rockies through
Wyoming on I-80. I hope I get a lucky break with the weather. Although at
this time of year it's a roll of the dice. I could sail through the
400-miles without too much effort, or I may get stuck in a hotel room for a
few days when it's nuts to be out on the road because of the snow or wind.
I'll sure be supporting the oil companies with my fuel efficient Uhaul rig
on this trip, that's for sure! :o(
My mailing address now is:
Steve Gregory
850 Capital Walk Drive, Apt. #1308
Tallahassee, FL 32303
I'll have my mail forwarded to my new address once I have my apartment
confirmed in Boise. Once again, I've never asked for anything from anyone
for my page, I've enjoyed doing it and I'm glad that I started it back up
again. I know it sounds stupid, but when I cancelled it a week or so ago, it
was like I was saying goodbye to an old friend. Like I said it's been my way
of repaying everyone for everything that I've gained over the years. If you
want to donate something for the cause, it would be ungracious of me to turn
it away. I appreciate it, I really do...
Thanks Doug,
Steve
-----Original Message-----
From: Douglas Pauls
Sent: Wednesday, March 13, 2013 10:18 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Hey Steve,
What is your mailing address? I would not mind chipping in to cover the
costs of your server. I do it with some of the other listservs I find of
use.
Doug Pauls
From: Steve Gregory <[log in to unmask]>
To: <[log in to unmask]>
Date: 03/13/2013 09:07 AM
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN
via-in-pad solder slug problem.)
Sent by: TechNet <[log in to unmask]>
Hi Denny,
You know what, I changed my mind. I called Homestead and talked with them,
explained the issues that I had with their service, and they said that
since I had been such a long time customer of theirs, they offered to
reduce the fees! You don?t get that too often these days!
They still had my webpage and content, and was able to restore everything
back. So it is back up: www.stevezeva.homestead.com
So it?s still here, and I will still keep this going. So if anyone still
needs a picture or two posted once in a while, I?m still here. I?ve put so
much time an effort into this already, I?m glad that I can continue...
Steve
From: Dennis Fritz
Sent: Tuesday, March 12, 2013 10:04 PM
To: [log in to unmask]
Cc: [log in to unmask] ; [log in to unmask] ; [log in to unmask]
; [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Steve,
I had hoped that our work on the IPC Process Effects revision - the old
740 - could use some of the pictures. Sorry they are mostly gone now. I
have copied the other people working on that document.
Would you still be willing to share what you do have?
Let us know.
Denny Fritz
-----Original Message-----
From: Steve Gregory <[log in to unmask]>
To: TechNet <[log in to unmask]>
Sent: Tue, Mar 12, 2013 5:46 pm
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Hi Steve,
No I do not. I have some of the images on my own computer, but not all.
That
was one of the problems I was having with Homestead (aside from the ever
increasing fees), I couldn't back my page up and all the content on my own
computer. I could do a back-up through only through Homestead, but
couldn't
bring the content on to my own computer which I thought was strange, and
frankly pissed me off. It was one of the big reasons why I decided to pull
the plug...
Steve
-----Original Message-----
From: Steven Creswick
Sent: Tuesday, March 12, 2013 11:47 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Either will require a some amount of time on Steve's part. I think more
time going to the IPC site if placing in separate folders, etc.
The question is whether you still have everything or not - Steve?
Another Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Tuesday, March 12, 2013 11:11 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
How about into DROPBOX?
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tontis, Theodore
Sent: Tuesday, March 12, 2013 10:00 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Guy is right,
Would it be possible to move some of the photos from Steve's sight to the
IPC site?
Ted T.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Guy Ramsey
Sent: Tuesday, March 12, 2013 9:57 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Gosh Steve, that site was a gold mine. Sorry to see it go.
Guy
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Tuesday, March 12, 2013 9:56 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad
solder slug problem.)
Hi Craig,
Sorry to say that I've closed my site down. Homestead was raising their
fees
to the point that I had to think about the cost benefit that was coming
from
paying for it out of my pocket. IPC started the group-share site where
images can be posted, and I might have gotten a request or two once in a
while over several months, so I decided to shut it down...:o(
It was a fun ride while lasted though... :o)
Steve
-----Original Message-----
From: Craig Cullum
Sent: Tuesday, March 12, 2013 9:33 AM
To: [log in to unmask]
Subject: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder
slug problem.)
Hmm, I'm getting a "Sorry, the site you requested has been disabled" msg
when accessing Steve's homestead site. Never had a problem before using
IE9,
although I did recently clear temp internet and Java files.
Is anyone else having a problem?
Craig Cullum, Engineering Technologist, AMTELCO
e: [log in to unmask]
f: 608 838 8367
v: 608 838 4194, or 4197, x128
Please visit us at www.amtelco.com
"I couldn't wait for success . . . so I went ahead without it." Jonathan
Winters
"I don't rely on inspiration. It's unreliable. I just get up in the
morning
and I go to work." Nick Cave
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Friday, February 22, 2013 5:33 PM
To: [log in to unmask]
Subject: Re: [TN] 48-pin QFN via-in-pad solder slug problem.
Hi Alan,
Sorry about the delay, but I got your pictures posted. The links are
here:
http://stevezeva.homestead.com/QFN_48_pin_pry.jpg
http://stevezeva.homestead.com/QFN_48_pin_reflow.jpg
http://stevezeva.homestead.com/QFN_48_pin_x-ray.jpg
<SNIP>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
