Steve,
Being held hostage is not a good feeling. You are pillar to our community.
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Tuesday, March 12, 2013 7:14 PM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Steve,
I can understand the frustration. I am having it in other areas at the moment.
In any event, thank-you again for all the years you graciously posted all our stuff!
Best regards,
Steve
-----Original Message-----
From: Steve Gregory [mailto:[log in to unmask]]
Sent: Tuesday, March 12, 2013 5:46 PM
To: Steven Creswick; [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Hi Steve,
No I do not. I have some of the images on my own computer, but not all. That was one of the problems I was having with Homestead (aside from the ever increasing fees), I couldn't back my page up and all the content on my own computer. I could do a back-up through only through Homestead, but couldn't bring the content on to my own computer which I thought was strange, and frankly pissed me off. It was one of the big reasons why I decided to pull the plug...
Steve
-----Original Message-----
From: Steven Creswick
Sent: Tuesday, March 12, 2013 11:47 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Either will require a some amount of time on Steve's part. I think more time going to the IPC site if placing in separate folders, etc.
The question is whether you still have everything or not - Steve?
Another Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Tuesday, March 12, 2013 11:11 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
How about into DROPBOX?
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Tontis, Theodore
Sent: Tuesday, March 12, 2013 10:00 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Guy is right,
Would it be possible to move some of the photos from Steve's sight to the IPC site?
Ted T.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Guy Ramsey
Sent: Tuesday, March 12, 2013 9:57 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Gosh Steve, that site was a gold mine. Sorry to see it go.
Guy
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Tuesday, March 12, 2013 9:56 AM
To: [log in to unmask]
Subject: Re: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Hi Craig,
Sorry to say that I've closed my site down. Homestead was raising their fees to the point that I had to think about the cost benefit that was coming from paying for it out of my pocket. IPC started the group-share site where images can be posted, and I might have gotten a request or two once in a while over several months, so I decided to shut it down...:o(
It was a fun ride while lasted though... :o)
Steve
-----Original Message-----
From: Craig Cullum
Sent: Tuesday, March 12, 2013 9:33 AM
To: [log in to unmask]
Subject: [TN] Off-topic problem (was RE: [TN] 48-pin QFN via-in-pad solder slug problem.)
Hmm, I'm getting a "Sorry, the site you requested has been disabled" msg when accessing Steve's homestead site. Never had a problem before using IE9, although I did recently clear temp internet and Java files.
Is anyone else having a problem?
Craig Cullum, Engineering Technologist, AMTELCO
e: [log in to unmask]
f: 608 838 8367
v: 608 838 4194, or 4197, x128
Please visit us at www.amtelco.com
"I couldn't wait for success . . . so I went ahead without it." Jonathan Winters
"I don't rely on inspiration. It's unreliable. I just get up in the morning and I go to work." Nick Cave
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Friday, February 22, 2013 5:33 PM
To: [log in to unmask]
Subject: Re: [TN] 48-pin QFN via-in-pad solder slug problem.
Hi Alan,
Sorry about the delay, but I got your pictures posted. The links are
here:
http://stevezeva.homestead.com/QFN_48_pin_pry.jpg
http://stevezeva.homestead.com/QFN_48_pin_reflow.jpg
http://stevezeva.homestead.com/QFN_48_pin_x-ray.jpg
<SNIP>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|