Thanks Bob... Will consiter 8mil therm's(3per pad) and increasing the anti-pad as well to in theory keep heat in the hole longer..? Thanks again for the input...
Regard's, Frederick Dark Jr.
Manager Senior PCB Designer
Crestron Electronics, Inc.
22 Link Drive Rockleigh N.J. 07647
P:201.750.7004 ext.11320
F:210.767.5772
[log in to unmask]
-----Original Message-----
From: Robert Wolfe [mailto:[log in to unmask]]
Sent: Friday, March 22, 2013 11:13 AM
To: (Designers Council Forum); Fred Dark
Subject: RE: Heavy copper planes and thru-hole soldering
Fred,
Well a simple general rule of thumb is to try and make the all the connection thicknesses across all the plane layers required to add up to what you would want as the MAX copper connection as if it were only one plane layer.
Now on this power design with 2oz and 5 layers of gnd that might be a little tough.
But with 2 layers of gnd and spokes of say 8 mil with 4 spokes per pad if my memory serves me, seemed to work out?
So possibly trying 8-10 mil spokes with only 2 spokes per pad?
Thermal relief calculations are total thermal width should be 60% of the pad (land) size Which if course is based on one plane layer connecting so one cold extrapolate That if I need more layers I still need to roughly keep that relationship For solder-ability. I haven't seen any real numbers anywhere as to how much you can really get away with when trying to connect numerous planes to same net and have all connect to thru hole pins with thermal on many layers.
Haven't had to deal with this in quite some time but I seem to remember them being able to solder boards with roughly those numbers with no problem?
Bob
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Fred Dark
Sent: Friday, March 22, 2013 10:28 AM
To: [log in to unmask]
Subject: [DC] Heavy copper planes and thru-hole soldering
Hi Designer council - I have a design where we have a power board that's 8 layers... the technology is surface mount and thru-hole... we are having soldering issues with the thru-hole parts getting the solder to wick up in to the barrel for IPC class 2... the most we have achieved is 30% of the barrel... the stack-up has 5 GND planes that these part connect to as a design requirement from the Ee... the planes are 2oz copper each and the thermals are 15mils that connect the thru-hole pin... component stack-up reference : .065dia pad, .085dia anti-pad and 4 - .015 spokes(45 degree angle), drill .035dia(FHS) component pin dia = .020dia... any suggestions..?
Regard's, Frederick Dark Jr.
Manager Senior PCB Designer
Crestron Electronics, Inc.
22 Link Drive Rockleigh N.J. 07647
P:201.750.7004 ext.11320
F:210.767.5772
[log in to unmask]<mailto:[log in to unmask]>
This e-mail message and all attachments transmitted with it may contain legally privileged and confidential information intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
This e-mail and any files transmitted with it are the property of Kimchuk Inc. and is solely for the use of the individual or entity to whom this e-mail is addressed. If you are not one of the named recipients or otherwise have reason to be believe that you have received this message in error, please notify the sender and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|