Try these guys.
http://www.blacklight.com/Blacklights-s
or just search blacklight led on Amazon
Lloyd E Duso
Diamond-MT
Plant Manager
(814) 535-3505
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ahne Oosterhof
Sent: Friday, February 08, 2013 3:18 PM
To: [log in to unmask]
Subject: Re: [TN] UV lamps for inspection
Now you have done it!!
UltraFire UV Flashlight: $49.00 SOLD OUT
Ahne.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ed Popielarski
Sent: 08 February, 2013 08:54
To: [log in to unmask]
Subject: Re: [TN] UV lamps for inspection
I keep an
http://unitednuclear.com/index.php?main_page=product_info&cPath=28_43&produc
ts_id=705 in my smock pocket. It's a CSI type flashlight with a UV bulb
bright enough to fluoresce conformal coating visibly in ambient room light.
FYI, that site has lots of cool stuff!
Ed Popielarski
Engineering Manager
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0965
Cl: 949-581-6601
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Lloyd Duso
Sent: Friday, February 08, 2013 7:48 AM
To: [log in to unmask]
Subject: Re: [TN] UV lamps for inspection
Doug is dead on, UV flashlights (Ebay is a great source), inexpensive
fluorescent bulbs (Lowes, HD), etc. Now a days there are even some LED mr16
UV bulbs out there.
Or if you are looking for a little nostalgia, take walk into your nearest
Spencer Gifts in the local mall. (I cannot go in there anymore with my work
clothes on as I look like a CSI crime scene.)
Lloyd E Duso
Diamond-MT
Plant Manager
(814) 535-3505
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Gerry Gagnon
Sent: Friday, February 08, 2013 9:54 AM
To: [log in to unmask]
Subject: [TN] UV lamps for inspection
Hi Technetters, Long time lurker looking for information and recommendations
for a UV wand (or lamp) for occasional use to inspect surfaces for
fluorescent contaminants. My biggest concern is safety, i.e. user
precautions. After that I am looking for advice on the correct wavelength UV
source for general electronic product use such as PCB, connector, PCBA, and
plastic product surfaces. TIA, Gerry
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
