Subject: | |
From: | |
Reply To: | |
Date: | Thu, 7 Feb 2013 15:33:03 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thank you all for your suggestions, I will be looking at several of them.
Some follow up questions:
1. If you are using the gravity fed guns, with the large reserviors on
top - do you use some form of tool rest to take up the weight? If so,
what kind? If not, do your operators complain about the weight and what
it does to their wrist (repetitive motion issues).
2. If you are using HVLP guns, are you using stepped down compressed shop
air (with drying and oil trap) or are you using a separate turbine system
to supply the air?
I use a turbine based HVLP gun in my woodworking and it screams like a
banshee, so I would be concerned about the noise.
Doug Pauls
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|