Wow, Within one hour of my request last friday Doug and Lloyd nailed it ror me. Impressive as usual!Now I am caught between shorter wavelength UV with lesser power, or higher wavelength UV but more power. Both units I like from the site Doug forwarded recommend the UV protective glasses. Thanks folks! Gerry
> Date: Fri, 8 Feb 2013 16:54:22 +0000
> From: [log in to unmask]
> Subject: Re: [TN] UV lamps for inspection
> To: [log in to unmask]
>
> I keep an http://unitednuclear.com/index.php?main_page=product_info&cPath=28_43&products_id=705 in my smock pocket. It's a CSI type flashlight with a UV bulb bright enough to fluoresce conformal coating visibly in ambient room light. FYI, that site has lots of cool stuff!
>
> Ed Popielarski
> Engineering Manager
>
>
> 970 NE 21st Ct.
> Oak Harbor, Wa. 98277
>
> Ph: 360-675-1322
> Fx: 206-624-0965
> Cl: 949-581-6601
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Lloyd Duso
> Sent: Friday, February 08, 2013 7:48 AM
> To: [log in to unmask]
> Subject: Re: [TN] UV lamps for inspection
>
> Doug is dead on, UV flashlights (Ebay is a great source), inexpensive fluorescent bulbs (Lowes, HD), etc. Now a days there are even some LED mr16 UV bulbs out there.
>
> Or if you are looking for a little nostalgia, take walk into your nearest Spencer Gifts in the local mall. (I cannot go in there anymore with my work clothes on as I look like a CSI crime scene.)
>
> Lloyd E Duso
> Diamond-MT
> Plant Manager
> (814) 535-3505
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Gerry Gagnon
> Sent: Friday, February 08, 2013 9:54 AM
> To: [log in to unmask]
> Subject: [TN] UV lamps for inspection
>
> Hi Technetters, Long time lurker looking for information and recommendations for a UV wand (or lamp) for occasional use to inspect surfaces for fluorescent contaminants. My biggest concern is safety, i.e. user precautions. After that I am looking for advice on the correct wavelength UV source for general electronic product use such as PCB, connector, PCBA, and
> plastic product surfaces. TIA, Gerry
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|