TECHNET Archives

January 2013

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ramakrishnan Saravanan <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Ramakrishnan Saravanan <[log in to unmask]>
Date:
Fri, 4 Jan 2013 10:23:28 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (9 lines)
We are making space quality MLBs. We are using hot mounting for micro section. 
My understanding is hot mounting(Phenolic power of Buehler at 150 Deg C ,180 bar &  5 minutes)  of PCB specimen will destroy the PCB specimen Our metallographers are against using cold mounting. The reason  is they claim poor edge retention & high shrinkage   and observing faults are difficult. 

Which method of mounting is best for micro sectioning PCB ?. Which is the best resin & hardener having low shrinkage and high edge retention ?.

regards,

R.Saravanan

ATOM RSS1 RSS2